WinXP System 0x0000007b blue screen Problem solving method

Many users in the installation or use of WinXP system, there will be 0x0000007b blue screen problems. The reason and solution for the blue screen at every moment is different. The following small series listed out, I hope to help you.

　　One, 0x0000007b blue screen appears when installing the system:

　　Reason: This is generally because the system driver does not include the motherboard SATA,AHCI driver.

　　Workaround:

1, replace the disk controller to drive a more sound system installation disk;

2. In the motherboard BIOS, change the hard drive mode from Achi or SATA to IDE mode.

　　Second, the system installation completed after reboot appears 0x0000007b blue screen

Check whether there is a U disk boot disk inserted in the computer USB mouth, after removal can be restarted.

　　Third, initialization of the I/O system (usually refers to the boot device or file system) failed.

　　Reasons and Solutions:

1, you have a new computer installed on the second hard disk, or SCSI devices and modems and other devices, these devices and the original hard disk caused by resource conflicts, please check, through the appropriate settings to solve the problem.

2, the virus destroyed the system files, please use anti-virus software to kill the virus, and then use Windows provides the command console in the CHKDSK/R command to check the repair system files can be.

　　Four, XP system dual hard disk appears 0x0000007b

　　Workaround: use Diskgenius to rebuild the MBR for the primary hard drive.

There are so many possible reasons for blue screen, we can only use the most clumsy way to one by one. Don't bother, the right remedy is the key.