650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/70/C4/wKiom1W9pjaApQHrAACigKH61w4926.jpg "title=" 1.png " alt= "Wkiom1w9pjaapqhraacigkh61w4926.jpg"/>
Attention:
In this way of relaying, to understand the interface of the master-slave wireless router:
the wireless interface of the main wireless router can be viewed as LAN interface is the same;
the wireless interface from the wireless router can be viewed as The WAN interface is the same;
from the wireless router's wireless interface as Wan port, used only as a connection to the main wireless router LAN (you can see the WAN from the wireless router through DHCP, get IP from the LAN port of the primary wireless router) Address).
Wireless interface from the wireless router is not used for client access, after the configuration is successful, with the wireless client scan, and did not find that there is The AP is dd-wrt ;
from the wireless router can only be wired to provide clients with Internet access, the address obtained is 192.168.0.0/24 network segment;
The main wireless router can also provide a wireless way to provide the client with Internet access, the address obtained is 192.168.1.0/24 Network segment.
The system used from the wireless router is dd-wrt , configured as follows:
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/70/C1/wKioL1W9qFmzGlpXAAETUrarFWM051.jpg "title=" 1.png " alt= "Wkiol1w9qfmzglpxaaeturarfwm051.jpg"/>
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/70/C5/wKiom1W9poSg5LZ2AAIJbCDHbRY656.jpg "title=" 1.png " alt= "Wkiom1w9posg5lz2aaijbcdhbry656.jpg"/>650) this.width=650; src= http://s3.51cto.com/wyfs02/M02/70/C1/ Wkiol1w9qksizzd-aady2fg4uuk944.jpg "title=" 1.png "alt=" Wkiol1w9qksizzd-aady2fg4uuk944.jpg "/>
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/70/C5/wKiom1W9ps7Qzy5gAAIRYfbOXh4342.jpg "title=" 1.png " alt= "Wkiom1w9ps7qzy5gaairyfboxh4342.jpg"/>
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/70/C5/wKiom1W9pvXwUdWzAADrlYyNDEc747.jpg "title=" 1.png " alt= "Wkiom1w9pvxwudwzaadrlyyndec747.jpg"/>
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/70/C1/wKioL1W9qQbh9C5NAADhGYOeCKw205.jpg "title=" 1.png " alt= "Wkiol1w9qqbh9c5naadhgyoeckw205.jpg"/>
If you want to use a wireless router from the WIFI function, simply add a wireless virtual interface : Configure the following:
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/70/C5/wKiom1W9pymiWxqpAAIMGHZ-Rq0531.jpg "title=" 1.png " alt= "Wkiom1w9pymiwxqpaaimghz-rq0531.jpg"/>
using the wireless client, you can join the AP to Dd-wrt-vap to realize the Internet function.
This article is from the "xianyunyehe, leisurely fishing" blog, please be sure to keep this source http://cvgcv6666.blog.51cto.com/713624/1680962
Wireless relay Mode