Wireless Router password cracking

 

Wireless Router password cracking-BT3-spoonwep2

Wireless Router password cracking-BT3-spoonwep2 ------------------------------------------------------------------

This article describes how to use wireless network password cracking for technical communication. It reminds you to pay attention to wireless network security. Do not use it for other purposes. Otherwise, the consequences will be borne by yourself. Are you still worried about the wireless network signals found by computers? But do you feel a little pity when you see "enable secure wireless networks. As a representative of heart and regret, I have made full use of my subjective initiative, finally learned something, and finally succeeded in wireless password. The Joy of success is not exclusive. I wrote this tutorial. Note: 1. the wireless cracking mentioned in this Article refers to WEP cracking. WPA cracking is still a technical problem and is not discussed in this article. If your wireless route needs to be encrypted, to ensure security, use the WPA mode. If you do not know what WEP and WPA are, Baidu will give you a professional answer. The simplest explanation is the wireless signal password, which is more encrypted than the former. 2. This Article strives to solve the problem in a foolish and cainiao-like way. It is suitable for cainiao who do not understand it like me. Next we will start our decryption Journey: I. Preparation 1. an environment that can crack wireless signals. For example, I can search for signals at home.

2. One computer with a wireless network card (either laptop or desktop), as long as the wireless network card is compatible with bt3), I use a netbook of Samsung nc10.

3. 2 GB or above (I use Kingston 8 GB)

4. Search for and download bt3, more than 900 MB.

Note: bt3 is the full name of backtrack3, which is totally different from what we often call BT download. In my understanding, it is a Linux system that integrates some computer security software. It is precisely because of its birth and continuous popularity that cracking can make it easy for common users to speak.

5. Search and download the spoonwep2 Chinese package. Address:

Note: spoonwep2 is our cracking software, a powerful graphical tool for cracking the WEP wireless network password.

Ii. Installation

1. format the USB flash drive and configure it. For example, select FAT32 as the file system.

2. decompress the downloaded bt3 file and copy it to the USB flash drive. After the file is downloaded, you can see two folders, one is boot and the other is bt3. For example:

3. Start to install the bt3 system.

Click Start-run, Enter cmd, and press enter to enter the command line mode.

First, enter the drive letter of your USB flash drive. Here I Am Going To drive H, enter H: Then press enter, then enter CD boot press enter, enter the boot folder, and finally bootinst. bat press enter to start bt3 installation, for example:

Then the installation will display a prompt screen. Let's leave it alone and press any key to continue.

After you press any key, the computer automatically sets the Boot Record. The entire process is about 10 seconds. After the following figure is displayed, the USB flash drive can guide the system into bt3.

4. Integrate spoonwep2 software.

First, decompress the previously downloaded spoonwep2, which contains six files with the LZM extension. Copy these six files to the ultra drive \ bt3 \ modules folder,

In this way, our bt3 system has been integrated and installed, and can be cracked.

Iii. Cracking

1. Insert the USB flash drive that has been installed into the computer, restart the computer, and enter the BIOS. Set the USB flash drive to the first boot sequence of the computer. (If this is not set, you can ask other people, or find the setting method on the Internet. The methods for entering bios on each computer are also different, such as pressing F2, Del, F1, etc)

2. After the USB flash drive is enabled, the computer will automatically bring it into the bt3 operating system (if you choose VESA mode). The system interface is like this (beautiful ):
 

3. Start spoonwep2.

Step 1:

Choose start-Backtrack-> Radio Network Analysis-> 80211-> All-> spoonwep2. The operation is the same as that in windows.

After spoonwep2 is started, the Select Nic information setting window is displayed. You need to set the local Nic interface, wireless Nic chip type, and scan mode in sequence. After the selection, click Next to continue.

Step 2: Click Next to enter the scan window. Click launch in the upper-right corner to start scanning, and then click this button to stop scanning.

Part 3: The software will automatically scan the surrounding wireless network. During the scanning process, it will automatically list the information, transmission speed, and intercepted communication packet size of the wireless network, the wireless signal frequency end and encryption type used.

Step 4 has been scanning for a while, and there are several signals,

You choose a one to crack. I chose "Bingo. Click bingo with the mouse. The same white shadow will appear, and click" selection OK "below.

Step 5 is also the most exciting step. After completing step 4, a window appears.

After about 8 minutes, the WEP password will come out naturally.

(During cracking, the IVS data packet will be captured and can be decrypted between-in my experience)

Iv. Connection

After getting the password, let's see if it can be connected.

Return to the Windows system and use the password you just obtained to connect to the binggo network.

The password is correct, and it will be connected immediately.