Wireless NIC driver installation process for USB port of DWL-G122H/WF1

DWL-G122H/WF1 USB Port Wireless NIC driver installation process recently installed on the desktop with a friend of the DWL-G122H/WF1 USB Port Wireless NIC, found in linux cannot drive. Lsusb command result Bus001Device002: ID2001: 3306D-LinkCor...
DWL-G122 H/W F1 USB Port Wireless NIC driver installation process recently installed on the desktop with a friend of DWL-G122 H/W F1 USB Port Wireless NIC, found that in linux cannot drive. Lsusb command result Bus 001 Device 002: ID 200:3306 D-Link Corp. [hex]
The model of my Nic chipset is not identified. You have to go to the device manager under windows to find it. Click network Adapter, double-click D-link DWL-G122 Wireless g usb Adapter, select the driver in the pop-up window, click driver details, get the NIC driver file RTL8192su. sys
Www.2cto.com


Then download the linux driver corresponding to the RTL8192su chip from the Realtek official website.
Decompress the file rtl8712_8188_8192138192su_usb_linux_v2.6.6.0.20101111.tar.gz in the driver folder.
Go to the rtl8712_8188_8192138192su_usb_linux_v2.6.6.0.20101111 directory and run make to execute insmod 8712. ko to connect to the wireless network. You can directly connect to the wireless network for later boot:
Copy the generated 8712u. ko to the/lib/modules/2.6.35-22-generic/kernel/drivers/net/wireless/directory. Run the depmod-a command at www.2cto.com. In this way, the module can be automatically loaded.