Wireless route connection 1. the master route is configured as normal and configured to be able to access the Internet normally. 2. first, change the LAN interface to the network parameter-> LAN port settings, change the IP address of the LAN port, and change 192.168.1.2 (192.168.1. * The third one can use 3, and so on ...), after saving the changes, log on to the route configuration through 192.168.1.2. 3. set bridging, set your own Wireless Parameters in Wireless Settings> Basic settings, and then select "enable WDS" for the bridging function configuration ", after selecting this option, you will see some options for connecting to other routes. You can use the scan button to obtain the bridging SSID and bridge BSSID. After finding the main route, remember the channel number of the main route and select it, after entering the information, change the content of the channel drop-down list above, from automatically changed to the channel number of the main route, select the key type of the main route, usually the WPA-PSK, enter the password and save it OK, check whether the bridging route can be used to access the Internet!