Wm6.1 guide to pure system configuration and Optimization

Wm6.1 guide to pure system configuration and optimization Author: Sasha, Yue Wen
Read:

241 people

As a transitional version from wm6.0 to wm6.5 and then to wm7.0, wm6.1 has become the mainstream operating system for PPC mobile phones. Wm6.1 not only provides us with better
In addition to the Internet Explorer's performance, it also allows you to view most important information at a glance, improve the speed of cell phone settings, and transform the screen adaptation coefficient to adapt to small-screen mobile phones. However, many machine friends
When wm6.1 is used, it encounters system problems such as "STK automatic pop-up", "The program cannot be closed to release memory", and "ActiveSync automatic synchronization". How can this problem be solved?
What about it? Is it true that wm6.1 is so defeated? In fact, the problem mainly lies in the installation phase after the Rom is refreshed. At this stage, you only need to take appropriate measures in the Basic settings and optimization of the system to cure the problem.
Like "system flaws. Let's take a look!

"WM system-side problems that machine friends are most concerned about" survey published

08 ~ In, together with the HTC Touch series, O2
Xda series, X1, i900 and other machines continue to heat up, opening a WM mobile phone shopping spree, many machine friends have joined the WM camp. Then, how can we quickly implement
What about the superior experience from "Door" to "proficient? To this end, "home computer" conducted a reader survey on the system issues most concerned by WM machine friends.

According to the survey data, wm6.1 is the most widely used and favorite WM system version, with a voting rate of 94.8%. The requirements of machine friends for WM systems are mostly reflected in "Pure systems that like to integrate necessary functions", accounting for 78.2% of the total number. This shows that most of the machine friends have started or have already begun to realize the significance of the pure Rom system.

On the question of "perfect backup of wm6.1 System Data", 85.1% of the machine friends pay more attention to "How to comprehensively back up all the data of the system, even some important information set up can be backed up ". This shows that there is a high demand for the perfect backup of mobile phone data.

Next, we will summarize and analyze optimization issues. 81.6% of the machine friends showed great interest in "taking the lead in using the unique font of wm7"; 18.4% were very interested, but did not know how to install it. This shows that the font of is becoming the most popular beautification font in the WM system. Even Saipan s60 host friends are fond of.

On the issue of "shielding out system redundancy", 72.4% said "I 'd like to know", and 27.6% "I don't think it's okay, but I can understand it ". This shows that the WM system will still be excluded from some of the features that are not very tasty, which also shows the demands of our friends for pure optimization systems.

On the issue of optimization and beautification, 90.8% of machine Friends expressed "a great deal of attention to" How to transform and optimize the WM system ". It is my pursuit to make my machine run like a wind "; 8.0% indicates "general attention,
But I want to know more practical optimization methods ". This shows that everyone has an urgent need to optimize and beautify the WM system, but there is still a comprehensive sorting at the practical operation level of the system.

To sum up, the pure wm6.1 system, coupled with some simple optimizations, is the demand of most machine players. Of course, the premise of pure optimization is to use a pure Rom package in the Flash brush stage, that is, no
Without any third-party software or plug-ins, you cannot use malicious code. You may wish to start from the flash. Let's take a look at how to "Install!

Part 1

System Configuration and cleanup Redundancy

The "installation" mentioned here is similar to the computer installation, that is, the system is equipped and optimized on the basis of pure Rom to realize the good running of the wm6.1 system. We want to show you a pure wm6.1 system. I will take Shenda a701 and HTC diamond as examples to explain how to configure and optimize the system.

Step 01: complete backup data and hard start Machine

Before configuring and optimizing the system, we need to make a complete backup of the device data. In fact, it is easy to use a backup software called "SPB backup. Copy the downloaded "spbbackup Green Edition" folder to the memory card, and use "Resource Manager" on the mobile phone to enter the copy path.

Single-click spbbackup.exe To Go To The operation main interface, find full backup to go to the configuration interface, and change the "path" column to "Storage"
Card, keep the default value in the "file name" column, and click "continue". The backup Size Estimation and warning page is displayed. Click the "continue" button twice; the backup page is displayed, waiting for 20 seconds left.
Right, the software will prompt you "Soft Start" and click "restart" to complete the backup process (figure 1 ).

● Figure 1 use spbbackup to completely back up device data

Then you can start PPC. Take Shanda a701 as an example. You only need to press and hold down the volume key by hand, and then use a touch pen to poke the "reset" hole. The machine will shake for a short time and then start it and restore it.
Restore to the original state of the machine. If it is HTC's small drill s900, you need to install voice at the same time
Press the down key and the Action key, and then press the red reset key to enter the hard start mode. then press the volume up key.

TIPS: How can I start my machine?

The hard start methods of different devices are slightly different. It is best to refer to the mobile phone manual before the operation, or ask the seller or dealer at the time of purchase. We recommend that you choose a kernel-stable ROM for flash, preferably pure
The net type, no fonts installed, and any third-party software version can ensure the stability and purity of the entire system after hard boot. It is worth noting that there is a risk of Flash brush. Please be cautious!

Step 02: Install and beautify the system font

The welcome page will appear after the hard start. After the screen is corrected, click the "Mouth" button to enter the desktop today. At this time, we can see a display similar to the "Mouth". This is because the pure RoM does not have an integrated font.

I recommend three fonts for you here, which are the perfect simplified font "unisunfont. "Cab", "10.6mb" font "Microsoft yahei. cab and the newly released "11.7mb" wm7 original font ". wwm6.1.cab ".

Take the original wm7 as an example. Copy "wwwwm6.1.cab" to the first path of "My devices" and open "Resource Manager" to go to the copy path, click the location of the port wm6.1.cab and install it on the device. After that, you need to disable PPC and then restart the system to display the complete Subtitles (figure 2 ).

● Figure 2 Comparison of the desktop before and after installing the font in wm7

TIPS: Apart from pure Rom, can other Rom use these fonts?

Of course, if you do not use the pure Rom with "no integrated font", you can install your favorite font using the above method. We strongly recommend that you use the latest font of wm7, excellent results. You can choose "start"> "set/system"> "screen/Text skew" to increase or decrease the Display Effect of the screen text.

Step 03: Install and debug the system input method

After the font is installed, it is the input method. I recommend two input methods: "dianxun. Cab" and "Hanwang Mahua. Cab ".

Copy the two cab packages to the mobile phone memory card. After the installation is successful, perform a simple debugging. Choose Start> program> information, and then click SMS to go To the SMS page.

Click the input method in the middle of the square, select "dianxun input", click "set" → "comprehensive settings", and select the appropriate skin from the "interface skin" drop-down menu, others can be kept by default (Figure 3 ).

● Figure 3 configure the input parameters

In this case, click the button at the bottom of the screen to switch to the "orchid input" interface, and click the blue button at the bottom left of the interface. A dialog box is displayed, searching for options ". Then go to the handwriting menu. We recommend that you
Set "handwriting type" to "brush", "width" to "rough", and "handwriting color" to "color 1 ", the "change speed" can be set to "11" (figure 4 ). In this way, the screen will display
The effect of the current brush is very beautiful!

● Figure 4 set special effects of the macula Input Method

Step 04: block and delete system redundancy

The wm6.1 system provides us with a series of humanized improvements. However, not all functions are needed. We need to develop "Chinese characteristics ". First, block annoying "dynamic zone" or other
The STK service prompt popped up by the SIM card is displayed every time it is turned on, like a rogue software. Then, the contact on the SIM card is hidden. The WM machine reads the SIM card very slowly and does not need to be retained. then it stops.
The automatic synchronization function of wm6.1 can reduce battery and memory consumption.

You only need to delete the STK service and prompt text. cab and hide SIM contacts. cab and freeram. copy the cab to the mobile phone memory card, open the resource manager, install it on the device, and restart the machine once.

In the previous step, we have installed two very practical input methods, but what should we do if the system has an old three input methods from Microsoft? From the perspective of pure systems, we should block them. In fact, it is easy to use the CPL plug-in of the wince control panel named "pockettweak.

Use the USB cable to synchronize the PPC and PC ends and optimize the system. CPL is copied directly to the "Windows" directory, and then click "start"> "set/system"> "enter" on the mobile phone end.
"Start the plug-in", select "full screen handwriting input" and "handwritten input", and retain the "PinYin Input" option, set it as the default input method (figure 5), and click "OK" to save it.
Blocked successfully. You can also click "change input method name" to modify the display name of the input method at will, which is convenient and personalized.

● Figure 5 eliminate unnecessary input methods

Part 2

Restore backup data and optimize Configuration

In the first part, we have completed the basic configuration of the wm6.1 system by installing the optimized system font and system input method, and then shielding and deleting redundant system content. The following describes how to further optimize the performance of a pure system.

Step 01: Restore backup data before hard start

Still use spbbackupto resume the job. Click "Restore spbbackup.exe" to go to the main page. Then click "Restore backup" to go to the configuration page. In the tree Path box, select
In the “backup_20081122.exe file, click "continue". A confirmation prompt is displayed, and click "continue" to find full recovery. At this time, the "time adjustment" field is entered.
And click "adjust time" to go to the "clock and alarm settings" page.

Set the date under "resident City" to the same date as the backup file, that is, "". Click "OK" and then click "continue" twice "; A warning page appears, straight
Click "continue" to enter the recovery page. Wait for about 20 seconds. The software will prompt you to soft-start PPC and click "restart" (figure 6 ). Data restoration is completed after restart.
.

● Figure 6 restore the full backup data

Step 02: optimize the telephone Module

We can install "intelligent dialing" for the telephone module to better recognize the contact number. Copy the "intelligent dial number" file folder to the mobile phone storage card, and install "intelligent dial number .cab.pdf" to the mobile device, copy "celceledial.exe" to "windowsstartup", and restart the machine once.

Of course, "Incoming call display" is also required. You can use "Incoming Call Genie. However, the author found that although the laidian genie can run in the background, it occupies a large amount of memory and is not suitable for low-end PPC. In this example, we recommend that you use an extraction program called callback callerloc.exe.

You only need to copy the callerloc.exe, callerloc. dat, and sqllite. DLL files in the hidden display folder
In the Windows directory, a shortcut named "callerloc.exe" is created under "windowsstartup.exe", and then the PPC is restarted. Tested
The caller information is displayed correctly (figure 7 ).

● Figure 7 call Display Test Results

We can also set the "anti-electric vibration" function for aiji, which was originally integrated only on high-end models such as HTC diamond. Now we can show this function on any PPC. You only need to copy the local earthquake recovery .exe program under the local earthquake recovery folder to the "windowsstartup" path, and then restart the machine (figure 8 ).

● Figure 8 enable the "power-off" Function

Some friends also reported that the call delay of PPC mobile phones was very high. I also think this is a major injury to PPC, but we can use the system software to optimize it, keep the latency within 3 seconds. We also have the opportunity to reflect that we hope to maintain the screen brightness during the call process to conveniently record the call information. Now we can use a small cab package.

You only need to remove the 3-second delay patch for incoming calls in the "phone function" folder. cab and phone call are not on screen. the cab is copied to the mobile phone memory card and installed on the device using the resource manager.

Step 03: optimize the SMS Module

The original text message chat mode of wm6.1 is a favorite of some machine friends. However, those who do not buy accounts still account for the majority. The so-called radish and vegetables have their own love. In fact, they use a chat mode switch
You can easily debug wm6.1 text messages using the. Cab "cab package. Copy the "chat mode switching program. Cab" in the "SMS module" folder to the mobile phone memory card and use "Resource Management ".
To the device.

Choose "start"> "program"> "chat mode switch" To Go To The setting page, starting from the concept of pure system, we recommend that you check and disable the text message chat mode, SIM card contact, and message sent after closing the text message (figure 9), and then restart the machine.

● Figure 9 disable the text message chat Mode

Step 04: optimize the switch and power display modules

I remember that it was quite troublesome to switch the host when I first started playing PPC. I had to press the shutdown button for several seconds to bring up a shutdown dialog box, and then click it with a touch pen to shut it down. Now, you can quickly shut down and restart the instance by using a small program of ON/OFF servers.

Copy the "shutxp.exe" file under the "switch ON/OFF" and "Electric volume display" folder to the main memory of the mobile phone, and create a shortcut in the "Start" menu under the Windows directory.
To shut down or restart the instance, click Start> program> shutxp and click the corresponding button on the pop-up page (Figure 10 ). You can also install
Ding. Cab "to achieve faster switch-on performance.

● Figure 10 beautiful XP-like switch-on Performance

Of course, when talking about PPC, the battery is also a major injury. We need to pay attention to the battery consumption at all times. In fact, the power information can be vividly displayed using the extracted power plug-in, and the memory usage can also be changed to "power on and off"
The "Power number" display in the "volume display module" folder. cab and battery. copy the cab to the mobile phone memory card. After the resource manager is successfully installed, click Start> program>
For all four items under "power setting/General", check options ", click" OK ", and then restart. The effect is quite good. You may try it (figure 11 )!

● Figure 11 Power entry and digital power display

Step 05: optimize the memory and driver modules

When wm5.0 is used, the smclose plug-in is used to control the memory. In wm6.1, we can directly use "smart performance" to release the memory. Add the "memory and driver module" File
Copy "smart performance. Cab" under the folder to the mobile phone memory card and use "Resource Manager" to directly install it on the "device. Click Start> set/system> smart
Click Quit to go to the main interface and select close program to release memory (figure 12 ).

● Figure 12 use smart quit to release memory

If your PPC supports 4g/8g/16g SD/TF card extension, you need to install the sdhc driver, copy "sdhc_8g wm6.cab" directly to the mobile phone memory card, install resource manager directly on the device and restart PPC to identify SD/TF cards below 16 GB (figure 13 ).

● Figure 13 16g card recognition is successful after the sdhc driver is installed

We can also use memmaid to clear junk files and registries so that PPC can better release memory. Copy the mongomemmaid.exe file under the ghost garbage cleaning software folder to the mobile phone memory card. After opening it with "Resource Manager", the software prompts registration and click to enter the registration page.

In this case, double-click "keygen.exe" on the PC terminal to open the computer. In the first blank bar, enter the machine code displayed on the mobile terminal registration page. Be sure not to enter the "-" symbol to directly enter the machine code.
Enter an uppercase letter. For example, if the machine code of the author is 2f181g143ffcgek4, click Generate to generate a group of numbers.

Then in the mobile phone end in order to enter the registration column, for example, the author of the registration code for "TGPR-JMWD-YVKS-TCEZ ". After successful registration, click "“memmaid.exe" to start the main interface, check all projects "option, and click" clear ". The software will automatically clean up the system's junk files and registry, which is very convenient (figure 14 ).

● Figure 14 run the quick cleanup Program

Step 06: optimize system icons and display modules

After many third-party software are installed, multiple shortcuts are generated in the "Start" menu under the Windows directory. When you click "start"> "program" in sequence, many icons are displayed, which can easily lead to visual fatigue. Starting from the concept of pure system, we need to optimize it.

First, use the USB cable to synchronize the PPC and PC ends. On the PC end, go to the "program" path in the "Start/" menu under the Windows directory, create Several folders, sort the icons, and add
The same folder. For example, the author creates folders such as GPS, tools, controls, entertainment, games, and gravity sensing games, then drag the standard shortcuts to each
Folder to complete the classification.

Then, you can use a program to adjust the icon spacing of the system to make the display more intuitive and fresh, and more in line with the level of the pure system. Copy the system image ing .exe "to the mobile phone memory card.
. Use Resource Manager to enable horizontal icon spacing and vertical icon spacing to be set to 80 ", set the title Font to "6" and click "X" in the upper-right corner of the screen
Button to save. The display effect is amazing (figure 15 )!

● Figure 15 display effect after adjusting the System icon spacing

If you find that your SD/TF card has a name recognition problem on the PC side, such as being identified as "Memory", "sdmmf", or garbled, you can use the "Resource Manager" to install "storagecard. cab modifies the card name to "storagecard ".

Step 07: optimize the system camera and Network Module

When we take pictures at night, we will encounter problems such as insufficient lighting and poor performance. We can use the system software side for repair. Use "Resource Manager" to install
After "camerapatch. Cab" to "device", you can enhance the brightness and contrast during shooting to improve the shooting clarity. You can use "Resource Manager" to install
After "camera_speckle_fix.cab" to "device", it can eliminate the red, blue, and snowflake effect in the dark light, which is recommended.

In terms of network traffic control, I recommend a software called "GPRS switch. Copy "nodata. Cab" in the "camera and network module" folder to the mobile phone memory card.
Use Resource Manager to install the device, click Start> program> nodata to enter the main interface (Figure 16), and select Internet
CSD and WAP
For CSD, click toggle and change it to enabled, so that cmnet can be completely disabled. If you use WiFi, you can directly turn off all four items.

● Figure 16 disable the cmnet connection mode

Summary:

With a focus on some operations of the wm6.1 system, after a series of system configuration and optimization work, we can finally truly enjoy the pure optimized, high-performance wm6.1 system. For all the software and programs in this article, visit http://www.cbifamily.com/download/200924.html.

The basic operations and Optimization in this article are not guaranteed to be applicable to all PPC mobile phones. A small part may not be able to reflect the best results on your PC. If an error occurs or the system is unstable, enable it in time.
To avoid damage. The author hopes to share the experience of pure Optimization of wm6.1 system with our host friends through this "installation" topic, so that our PPC can be able to work as easily as possible.
Wind!

(Figure/wenyuewen) (243001)