Wmware Virtual Machine Nat access

You use green vm6.0, and some services are enabled on your own.

 

Echo. =-= select the service project to be started =-=
Echo.
Echo. 1 start-Local Network Service (bridging, directly connecting to the Internet)
Echo.
Echo. 2 boot-USB and COM services
Echo.
Echo. 3 enable-DHCP and Nat services (shared Internet access, vnic 8 is installed by default)
Echo.
Echo. 4 start-user permission Service
Echo.
Echo. 5 install Virtual Network Card 1 (Local Network)
Echo.
Echo. 6 Return

 

To enable the virtual machine to access the Internet through NAT, You need to enable the above "DHCP and NAT service". After enabling the Service, the host VM virtualizes the NIC vm8, and its IP address is set to 192.168.203.1 by default, this does not require additional settings (you can modify it if you want to modify it ). The next step is to set the Virtual Machine for Internet sharing. First, select the virtual machine's Internet access mode as Nat, and then set the IP address in the virtual machine, you only need to change the virtual machine to automatically get the IP address and automatically get the DNS server, the virtual machine can access the Internet. If you have tested WINXP and Linux, you can access the Internet normally.