WPS 2007 double-sided Printing tips: Skillfully set the binding line

With the popularity of home computers more and more high, ordinary inkjet printers have entered tens of thousands of households, due to the low price of ordinary inkjet printers, its function is relatively small, compared with the high-end Aurora printer, the typical is not the automatic duplex printing function. But, home use, single-sided not only a little waste of paper. Is there a way to set up, so that ordinary inkjet can be double-sided printing it?

It is due to the lack of automatic duplex printing function of ordinary inkjet printer, most people covet the convenience, a page of neat paper, only use one side, and the other on the waste of reason, and people around this waste has long been ignored, which is contrary to the State Council advocated the spirit of building a conservation-minded society.

Although ordinary inkjet printer does not have automatic duplex printing function, and WPS provides us with manual double-sided printing auxiliary function, manual double-sided printing purpose is to maximize the savings of paper and improve its utilization. In WPS, when manually printed on both sides of the binding line, has become a problem is not "problem", in order to facilitate binding, odd-numbered pages of the bookbinding generally required on the left side of the page, and even the binding line of the page is required on the right side of the page, and in the WPS Page Setup, its gutter default settings can only be On the left or top side of the page (Figure 01), this for the two-sided printing of even-page binding line settings caused great inconvenience, double-sided printing can only be used to increase the margin of the page to solve the problem, although saving the paper, but lost the page "harmonious" beauty.

Figure 1

When we finish editing the document in WPS2007, we want to print the key issue is the binding line set up, click "File-page settings", in the Open Page Setup window is to set the margin of the page (paper is generally the default), The second is to set a good binding line and its position (generally left), and then click the "Layout" tab, in the following "header and footer" select "Odd and even page" (Figure 02), then our document page has a noticeable change, the left side of the odd page will automatically free our set of gutter, and even the right side of the page Also automatically free up the binding line we set (see Figure 03).

Figure 2

Figure 3