Wvdial settings for linux3g wireless Internet access

Linux3g wvdial setting 1. install wvdial in the rpm package there is a rpm-ivhwvdial-1.54.0-5.2.2.1.i386.rpm (corresponding to the corresponding version of the installation) 2. configure/etc/wvdial. conf [Dialer3g] Init1ATZInit2ATQ0V1E1S00 & amp; C .. linux 3G wireless Internet access wvdial settings 1. install wvdial in the rpm package contains the rpm-ivh wvdial-1.54.0-5.2.2.1.i386.rpm (corresponding to the version of the installation) 2. configure/etc/wvdial. conf [Dialer 3g] Init1 = ATZ Init2 = ATQ0 V1 E1 S0 = 0 & C1 & D2 + FCLASS = 0 Modem Type = Analog Modem Baud = 4608000 New PPPD = yes # check whether loading ttyUSB0/de V Modem =/dev/ttyUSB0 ISDN = 0 Phone = #777 # Password password = Password # Username = user 3. run the command "lsusb" to check whether the usb mount-t auto/dev/cdrom/3g is read. check whether ttyUSB0 is available under "/dev, no re-insert 4. connect wvdial 3g if the connection is successful. For Lan, disable eth0: ifconfig eth0 down before running wvdial 3g. (check whether this is required. I have not done this step for the configuration here) after route-add 192.168.0.1 netmask 0.0.0.0 gw 0.0.0.0, execute: ifconfig eth0 down so that you can use wireless 3G and Lan public network in linux at the same time.