Xdos attacks to the ac lab environment

In order to use Xdos to attack the ac (Wireless switch) experiment, we have made great efforts to build an attack environment,
Because the villain is dull, the error "send error 10004" is reported by Xdos in xp! Therefore, I installed windows server2003 in the virtual machine to run Xdos. Yes
 
If you need to set up something to run Xdos in xp, please don't hesitate to give me some advice. Thank you first ......
Some of my configurations are as follows:
 
1. The virtual machine network configuration is in the Bridged mode. Edit-> Virtual Network Editor under VMare, and select the NIC to be forwarded under VMnet0
 
. Then set the CIDR block. My settings are as follows:
IP Address: 192.168.254.3
Subnet Mask: 255.255.255.255.255.0
Default Gateway: 192.168.254.2
2. Configure the NIC selected from the VM in the Host:
IP Address: 192.168.254.2
Subnet Mask: 255.255.255.255.255.0
Default Gateway: www.2cto.com
3. configure a management IP address on the vswitch. My configuration address is 192.168.254.9.
Switch (config) # interface vlan 1
Switch (config-if-vlan1) # ip address 192.168.254.9 255.255.255.0
Change (config-if-vlan1) # exit
Test whether the three can ping each other. After ping, we can launch Xdos attacks!
We are disappointed that our ac is too fragile, or Xdos is too powerful! During the attack, the IP address of the switch cannot be pinged.

Author: Jiang yaofeng