Xi-how to use USB to synchronize wince with PC (tianembedded Development Board, arm)

Xixi teach you how to use USB to sync wince with PC (reprinted please note the Source: http://www.cnblogs.com/c51port/archive/2011/03/11/1980354.html)

How to use USB to synchronize wince with PC

Previously, WinCE can be used to synchronize the network cable with the PC, but the PC won't be able to access the Internet. It is inconvenient to query the information online during debugging. It is very difficult to pull the network cable. It took me a whole day to sync with the USB!

Are you still worried about this? Xixi will come up to share with you immediately.

First, make sure that your Windows server has been burned.

Xixi uses the tianembedded Development Board

It looks like this:

 

Next, let's share with you the specific steps: 

1. Install activesync4.5

2. Connect the USB cable

3. When the board is started (or reset), ActiveSync will call it, and then the driver is prompted on the PC. Then select the drive path (D: \ tq2440 supporting CD 201001 (h) \ tq2440_cd \ Windows platform development kit \ USB download driver), do not select the wrong Oh, Xi choose to miss, the driver has been installed ing, can not return, the result is directly unplug the USB cable, you will have a wonderful drink-blue screen-Great calcium. (If you have already installed a driver, no prompt will be displayed.) If the file is missing during the driver installation process, go to (D: \ tq2440 supporting CD 201001 (h) \ tq2440_cd \ wince resources \ wince platform development kit \ wince Synchronization Driver) Find wceusbsh. sys File

4. Go to the "Start" logo of the Board-> Settings-> network and dial-up connections, create a connection, select "straight line connection", and next, select "USB cable" as the device ", click Configure, set the port to 15200 baud rate, and set "NONE" for the traffic control, and then OK.

5. Set the new connection to default, and disable dm900 (the connection used for Internet access. Enable the new connection.

6. If there is no response, choose File> connection settings> All-hooks> connection> next. When the "Searching for mobile devices" interface appears, connect to USB immediately, it's OK. With the help of ActiveSync, the "New Partnership" page appears. Next, check the "file" and click "Next. However, XiXi prompts a message on the board: "application error: repllog.exe has a serious error and must be disabled". It has not been resolved yet ...... However, XiXi did not care about it. He stopped it directly and then came back. On the "New Partnership" page, he chose "no". He can directly browse the files in wince. The whole process is like this. If anyone can solve the problem of "Creating a cooperative relationship", please give me some advice.

A key step is as follows:

Unplug the USB, use ActiveSync to actively connect to the PC, and then connect the USB cable immediately!

In addition, the system time of Wince must be consistent with the system time on the PC!

@

When the "mobile device" interface appears, you can lose files to it.

The following sections (in the order described ):