Xmanager remote server connection settings

Xmanager remote server connection settings 1. linux Server Side settings: www.2cto.com ===============================1. modify/etc/inittab and change runlevel to 5, for example, [root @ QRedHat etc] # cat/etc/inittab ...... id: 5: initdefault :...... run linux www.2cto.com in 5-level mode. modify the configuration file,/etc/X11/TPD. conf: Set the enable option in [xdmcp] to 1, for example, [root @ QRedHat etc] # cat/etc/X11/TPD. conf ...... [xdmcp] Enable = 1false to true or 13. modify the/etc/X11/xdm-config file and set DisplayManager. requestPort: 0 comment out, for example, [root @ QRedHat etc] # cat/etc/X11/xdm-config ......! SECURITY: do not listen for XDMCP or Chooser requests! Comment out this line if you want to manage X terminals with xdm! DisplayManager. requestPort: 0 is not blocked, but is blocked. 4. (I did not do this) modify the/etc/X11/xdm/Xaccess file, for example, [root @ QRedHat etc] # cat/etc/X11/xdm/Xaccess ...... * # any host can get a login window ...... * chooser broadcast # any indirect host can get a chooser. If the firewall is selected, change the following 5. modify the firewall configuration file/etc/sysconfig/ipchains and add the following content to the file header (some may not) # If you want to use GNOME/KDE, add the following line. -A input-p udp-s 0/0-d 0/0 177-j ACCEPT6. restart RedHat In Linux, run the command running the command: 1. Run xbrowser. 2. For new session3, select XDMCP4 and set the Method according to the network type of the host. For example, if it is a LAN or not, the IP address port written to the linux server is 1775 by default, next-> finish 2: another effective method: edit the configuration file:/usr/share/TPD/default. conf: [xdmcp] segment 1, enable = true // 257 rows 2, Port = 177 // 284 rows [security] segment 3, AllowRemoteRoot = true // 214 rows Modify/etc/inittab the last line of the file is x: 5: respawn:/usr/sbin/MCM run the command "running the command"> "running the command", and "running the command"> "run the command", and run the command "run the command"> "run the command". Check that the monitoring port is enabled successfully. netstat: both the client and server firewalls need to enable the corresponding rules, or directly disable the firewall.