XP and 98 system dual network card Sharing Internet Setup method _ Networking Tutorial

Preparatory work:
1. Connecting Network cable
Double network card Interconnection, of course, the network cable, just classmate in a wiring company before work, so looking for the former colleagues to the 20-meter twisted pair. Here we commonly used the network cable are super five type unshielded twisted-pair, careful users will find that in the twisted pair has eight different color pairs of the core, each two lines twisted together, this is what we call it twisted pair of reasons.
Home users generally according to their own indoor structure can choose to buy the length of network cable, sometimes the telephone line may be in the house and the host location is not the same place, so we need a longer network of cable to connect. Friends in Beijing, twisted pair can go to Zhongguancun hailong, ding Good to Buy, is about 1 yuan a meter, very cheap. Because the use of not a lot, so try to choose some well-known brands of products, such as AMP, Avaya and so on.
2, Crystal Head
With the network cable, you need to connect the crystal Head, of course, also from a friend there to a few, connect the crystal Head of the network of professional nouns known as RJ45 connection sockets, is specifically used to connect the ends of twisted-pair lines. By making the RJ45 connection header, we can connect the network cable with the network card or concentrator device. The crystal head of the market a good general piece of money, the best to buy those crystal head material more hard brand credit, so that the crystal head will not be deformed. We need two cable, four crystal head, but the general user is best to buy a few more, in order to prevent pressure on the line when the false or wrong, to do again.
3, network card
Next need three network cards used to connect two computers and ADSL modem, home use of the network card most of the computer's PCI interface, theoretical transmission rate 10m/100m Ethernet card, many motherboards will integrate the network card, if there is an integrated network card, the best, and then buy two is enough. Here the author's motherboard integrated network card, then to the market and bought two Tp-link 10m/100m Adaptive network card, a total of 54 yuan of money.
Cost Calculation:
In the formation of this network, we used the above sample products, of which the network cable used 6 meters, Crystal Head 4, two network cards, a total of about 70 yuan, the cost is very low.
Small tip:
In order to be beautiful, we have also found a few wire cards, ready to put the network cable along the corner of the book. In fact, if you are going to the market to buy these several equipment, you can completely let the dealer to the line for you to do, it is best to use label paper and other things to mark the use of each root, lest home will be confused.
machine configuration and operating system
Note: Because the Internet generally only need to occupy the computer's CPU and memory resources, so here only for you to list these two and network card configuration.
Host configuration to connect ADSL modem:
ASUS 865G Motherboard
Celeron 2.6G
DDR400 512M Memory
Motherboard integrated Realtek RTL8101L network adapter
Tp-link 10/100m Adaptive NIC piece
Clients sharing the Internet:
ASUS 815E Motherboard
Celeron 800
SDRAM 256M Memory
Tp-link 10/100m Adaptive NIC piece
Operating system: From the configuration, the host configuration is relatively higher, so the Windows XP SP2 operating system is installed, its integrated PPPoE dial-up feature Internet access, use Internet Connection Sharing (ICS) for another machine to provide shared Internet services, Running the Windows XP operating system on a shared machine is a hassle, with the Windows 98 operating system installed.
Make a connection cable
Before connecting, you need to do two network cable, respectively need to connect ADSL modem and another computer. We first use the wire clamp to the computer to intercept the approximate distance of two, and left more than a meter, so that when the computer is moving will not be affected by the short line. Then take out a root, use the wire clamp will peel out the gray skin 2 centimeters, remember to peel the line must be careful not to hurt the internal network cable, otherwise it may cause Internet instability or simply can not access the Internet phenomenon. At this time, can see inside the four pairs of transmission copper wire, first in accordance with white orange, orange, white green, green, white blue, blue, white brown, brown color to the order of the line separate, the long out of the line and shielding fiber cut, with the hands of the line parallel to the whole good.
After the cable is divided, check the line sequence is correct, we take out the crystal head, copper pin up, carefully parallel to the line into the RJ45 socket, from the front of the copper wire has been completely touched the inside of the crystal head.
At this time, then use the wire clamp to suppress, the other end is still in accordance with the above method of production. Well, this completes the cable connecting the ADSL modem.
Connect ADSL modem cable ends line sequence correspondence relation (click to see big picture)
And then we'll do a second cable with two computers, which is basically the same, but one of them needs to be in line with white green, green, white orange, blue, white blue, orange, white brown, Brown.
Small tip:
When making connection network cable, we need two kinds of network cable, one is connect ADSL modem's straight line, one is to connect another computer's intersection line. The use of different connection line sequence, the user in the production of network cable must pay attention to these two lines, otherwise it may be a few devices are not connected.
shared Internet Settings
On the host, because the Windows XP operating system is installed, the PPPoE virtual dialing feature is already integrated, and the drivers for both network adapters are installed by default. Before setting, we set the IP address of the network card connected to another computer to 192.168.0.1, and the subnet mask uses the default. No settings are required for both the default gateway and DNS. The next step is to enter the shared Internet setup phase.
First, open the Properties page for the network Place, and select Create a new connection in the Web Tasks option of the Properties page.
You will start a New Connection wizard dialog box and click Next to continue because the feature we need is to access the Internet, so choose to access the Internet option here.
PPPoE virtual dialing requires you to manually set a username and password to achieve virtual dialing, and in the following illustration, select the "Broadband connection with required username and password" option.
The next installation is to require us to enter the ISP name, username and password, etc., are very simple.
OK, finished the host side of the PPPoE dial-up settings, we double-click the desktop Dial-up connection shortcuts, successfully through the user name and password verification, and then landed IE browser, found that the host has been able to the normal Internet. This is not a success, and finally we have to provide Internet Connection Sharing services for that Windows 98 operating system.
When you open the Properties page for your network place again, you can already see the icon for a broadband connection. I clicked the right button on this icon, and I bounced out the following dialog box, where you set up the broadband connection for security, network options, and so on, all we need is internet sharing, So the other options do not go to the tube, click the Advanced dialog box, then see the Internet Connection Sharing options, the default is closed, we click the checkbox to activate it.
In the previous settings sharing experience, I was sharing the Internet on the machine set static IP address, and then the gateway and DNS are pointed to the host's IP address. In this setting, I've seen one of the shared options that you can set to dial for other machines. After looking at the Internet, I found that, in Windows XP, the use of this feature, the other computer does not need to set a static IP address, and the host if not dial-up to the Internet, and the shared machine will need to access the Internet automatically enable this dial-up, which saves us a lot of work.
Finally, I will be another NIC driver installed, do not need any settings, open the client's browser, found that has been able to resolve to Microsoft's website domain name, input net.it168.com, found that the normal Internet has been able to.
Summarize:
The above for everyone introduced me when I first arrived in Beijing how to use the dual network card to share the whole process of the Internet, in fact, a lot of work can let the dealer or telecom installation personnel to complete, but that will not realize the process of happiness, so I suggest you in the form of a shared network, or the do-it-yourself, enjoy the fun of DIY.