Zabbix Monitoring 3com

Zabbix can monitor Cisco but not monitor h3c but my snmp everything is OK. (Do not envy me this snmp good software, I will attach to everyone.) )

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M00/5B/7A/wKioL1UKSDCjVA5YAAJoXacA_ho496.jpg "title=" Qq20150319114655.png "alt=" Wkiol1uksdcjva5yaajoxaca_ho496.jpg "/>

Why not, the answer, because h3c too lazy did not write Zabbix template, so Zabbix does not support it. Why H3C so lazy, because its MIB write too bad. After looking at it all have a little dizzy.

Let me show you. Isn't there some dizziness! H3C all use the same number as the God. What do you mean, iso.3.6.6.1.2.1.2.2.1.16.1? Please check your h3c corresponding MIB table on your own. I've checked it out here, and that means the traffic on the first port. All right. I'll write a templete for myself. So, I wrote a Zabbix templete myself.

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M00/5B/80/wKiom1UKWg3wtKN2AAQVVK-PTqU916.jpg "title=" Qq20150319130956.png "alt=" Wkiom1ukwg3wtkn2aaqvvk-ptqu916.jpg "/>

The self-corresponding templete is written as follows.

<?xml version= "1.0"?>
<zabbix_export version= "1.0" date= "02.04.08" time= "10.34" >
<ip>0.0.0.0</ip>
<port>10050</port>
<status>3</status>
<groups>
</groups>
<items>
<item type= "1" key= "GigabitEthernet1" value_type= "3" >If you want to see a few words, write them several times.
<description>GigabitEthernet1</description>
<delay>30</delay>
<trends>365</trends>
<formula>1</formula>
<snmp_community>public</snmp_community> * Public is not to change your own look!
<snmp_oid>iso.3.6.1.2.1.2.2.1.16.1</snmp_oid>
<snmp_port>161</snmp_port>
</item>
</items>
<graphs>
<graph_elements>Come up with a few mouth pictures, just write a few, see what you want!
<graph_item>
<sortorder>0</sortorder>
<drawtype>2</drawtype>
<color>009900</color>
<yaxisside>0</yaxisside>
<calc_fnc>2</calc_fnc>
<type>0</type>
<item>
<key>GigabitEthernet1</key> * I only looked at one port.
</item>
</graph_item>
</graph_elements>
</graphs>
</zabbix_export>

Don't want to write!!! All right. I'll give you this attachment. You change it yourself!

Then upload the templete to Zabbix and change the Zabbix configuration.

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M00/5B/80/wKiom1UKXE3zAj-cAAIeG54vlyw382.jpg "title=" Qq20150319131920.png "alt=" Wkiom1ukxe3zaj-caaieg54vlyw382.jpg "/>

Finally, to believe that, as long as it is open source, there is a natural way. As long as I can read it, I can let Zabbix read it, save it!

This article from "luojing" blog, reproduced please contact the author!

Zabbix Monitoring 3com