By xyicheng
1) set wifi to use the internet
And clear all connections in the Internet Settings in advance.
The wireless connection uses Internet settings; the NIC also uses Internet settings;
Nic IP address is specified DNS uses 202.99.266.4
202.99.160.68
Gateway: 192.168.1.1
2) Add the cmnet and cmwap connections to the unit settings
If Selected This network is connected to the Internet.
Set the proxy server to 10. 0.0.127
3)ConflictIf you set a USB connection to the PC
MediumSelectedEnable advanced network functions
When you connect to the Internet with WiFi, a message is displayed.
Unable to connect/check whether the dial-up or proxy settings are correct.
And the WiFi status becomes unavailable
Not selectedEnable advanced network functions
Connect to wifi again to access the Internet
USB connection has a set of IP addresses
1) set ----- connection ---- advanced ------ select Network
The Network Management page appears.
InProgramWhen you automatically connect to the Internet, use
Select unit settings
Select Edit
Enter organization settings
Select Proxy Server Settings
Check whether the network is connected to the Internet.
Do not select this network to use the proxy server to connect to the Internet (once set up, no matter whether you select any Web site to access the router)
2) Set ----- Wi-Fi --- set Wireless Network
A. Select a network adapter
Connect to my Nic
Select default unit settings
Click the adapter to modify the settings
Choose sychip cheetah WLAN gspi card
Select Edit
IP address
Select a specific IP Address
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
Name Server
If DHCP is enabled on this adapter, You can automatically specify the name server address
DNS: 192.168.1.1
Backup DNS: 202.99. 160.68 (you can skip this step)
WINS: NULL
Slave wins: NULL
B. Select a network adapter.
Select the network to access
For all available
You can also choose to add a new
Network Name: AAAA (any input)
Connect: select the default unit settings
Next step
Configure Network Authentication (matching with the wireless router)
Authentication: Public
Data Encryption: WEP
Whether to automatically provide the key
Network key: 88888888
Key Index: 1
3) All the OK connections are successfully tested and can be successfully accessed regardless of the Intranet or Internet. If the setting fails, restart the machine (for some reason, it works ).