Zhaoyang K49, E49 installation or modification of Windows XP system Setup Instructions

Source: Internet
Author: User
Tags lenovo

Reason Analysis:
Because Microsoft no longer provides Windows XP system technical support, the computer uses the hardware technology design time no longer consider XP system compatibility. In addition, with the development of hardware technology, the XP system released more than 10 years ago cannot support the new hardware technology platform. Therefore, the new model does not recommend installing the XP system. For example, because Intel's latest chipset has abandoned its support for Windows XP systems, it is not possible to install it as a Windows XP system with the latest Intel motherboard platform, and the system does not have drivers and software for this model, so Windows is recommended 7 (incl.) above operating system.
Solution:

If you are installing a Windows XP system for special requirements, you can try to change the installation based on the following actions.
Important Tips
Installation procedures used in the following scenarios refer to the installation of the original installation, ghost or PE installation because the installation process is not uniform, the system function is not fully consistent, we are unable to provide technical support. Ghost or PE installation method itself limited to the use of Exchange, informal installation system mode.
Several XP systems currently tested are not compatible with places:
1. GPT partitioning form. Early hard disk partitioning is a form of MBR partition, with the increase of hard disk capacity, the limitation of MBR partitioning cannot meet the requirement. A GUID disk partitioning system (GPT) that breaks the traditional MBR disk partition structure limits is introduced, and the number of partitions in the new structure is no longer limited (only 4 primary partitions can exist under the MBR structure), and the maximum supported disk capacity can exceed the 3 T limit. The operating systems currently supporting GPT partitioned formats are only a special version of Windows 7 64-bit systems and Windows 8 and Windows 8.1 systems. XP system is not supported. Therefore, the system needs to be modified in the BIOS UEFI boot mode is closed (UEFI mode can only be used in the GPT partition form), install the system to remove all the existing partitions, converted to MBR format.
2. The current computer using power management Chip XP system can not support, resulting in the installation of the 7B blue screen. The ACPI Advanced Power management feature is turned off by pressing F7 during installation and then continuing with the installation. XP system can not drive the effect of power management function will affect the use of the system sleep, hibernation and other power management operations, when the shutdown, will prompt "You can safely shut down", at this time need to click the power switch to normal shutdown.
Operation Description:
1. BIOS Related Settings
Please follow this step-by-step procedure, and no details can be skipped.
1 Restart the computer first, and press the notebook keyboard "F1" or "Fn+f1 key" (Specific keys, according to the screen below prompts to operate) key into the notebook BIOS settings interface.
2 after entering the BIOS setup interface, press the "→" key on the keyboard to move the menu to the "Restart" item, press the "↓" button on the keyboard to select the "OS optimized Defaults" option, press the "enter" key to open the option's Settings menu, press "↑" on the keyboard. Press the "Enter" key to confirm when you modify the default "Enabled" of this option to "Disabled". Press the "↑" button on the keyboard to select the "Load Setup Defaults" option, press ENTER to start the Restore BIOS Default feature window, press the "enter" key on the notebook keyboard to start the BIOS restore default function. Then press the "F10" key on the notebook keyboard to start the BIOS Save Settings window, press the "enter" key on the notebook keyboard to start the BIOS save settings and restart the computer's features directly in the window.


3 in the computer restart to "Lenovo" logo screen, and press the notebook keyboard "F1" key to enter the notebook BIOS settings interface, press the keyboard "→" button to move the menu to the "Startup" item, press the keyboard "↓" button Select to "Uefi/legacy Boot option, press "enter" to open the setting menu of the option, press "↓" button on the keyboard and change the default "Both" of the option to "Legacy only" and press "return" key to confirm. Press the "F10" key on the notebook keyboard to start the BIOS Save Settings window, press the "enter" key on the notebook keyboard to start the BIOS save settings and start the computer function in good faith.

4 Most XP system installers do not contain AHCI drivers. If you use Setup without the AHCI driver, you need to change SATA mode from "AHCI" to "Compatibility" under the "Config" tab in the BIOS. Then press F10 to save the settings.
2. System Installation
1 when the computer restarts to "Lenovo" logo screen, and press the notebook keyboard "F12" or "fn+f12" key into the notebook's boot settings interface. At this time will your notebook's CD-ROM tray eject, put into the genuine Windows XP operating system CD after the CD drive tray back, and select the interface of the "ATAPI CD1" Item and press "Enter" key to achieve the CD-ROM drive boot.

2 The XP system does not support GPT partition format, you need to delete the partition, transform the format, and then repartition. You can use the "Diskpart" tool with Windows 7 and above version of the Windows system Installer, please click here to find out the specific instructions. Since the XP system itself does not have this functionality, you need to borrow this feature from the Windows 7 system. The PE or Ghost system installation method is not available for information.
3) Turn off AHCI Advanced Power management features
When the "press F6 if you need to install ..." prompts, click the "F7" button, normal installation

Then the installation interface is similar to the traditional computer installation interface, no different.
Even if it can be installed, most drivers cannot be solved, and computer hardware performance is limited. The use of the problem is also more, if you want to have a better operating experience, this notebook we recommend that users install Windows 7 or Windows 8 system.

Related Article

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.