ZTE W815/w615 Wireless Thin AP changed to home wireless router configuration method

Configuring the AP Route Mode configuration Guide via a WAN port connected to the W815 network cable

This device has 4 lights only, when the state status LED is off, the description has been started, before you can enter the management IP in the browser to configure the operation. (This device is configured to bridge the FAT mode, you just need to go in to encrypt the wireless signal ZTE-AP)

Note: The steps 4, 5, and 6 of this tutorial can be skipped.

1. Enter the setup requires a fixed IP to open the local connection.

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/70/0B/wKioL1WwbJbhwzlVAAR-aVJGJik596.jpg "title=" 1.png " alt= "Wkiol1wwbjbhwzlvaar-avjgjik596.jpg"/>

2. Open the browser, enter 192.168.0.128, jump out of the login window, the default is the English interface, click Chinese can switch to the Chinese setting interface.

3. Enter login account is admin password is admin

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/70/0E/wKiom1WwavKzsr4OAALkHoKCywU010.jpg "title=" 2.png " alt= "Wkiom1wwavkzsr4oaalkhokcywu010.jpg"/>

4. Click Manage--access point management--access point mode. Select the FAT mode and click OK. After the restart is complete. Select Network-Broadband settings-broadband connection settings, which is AP mode by default.

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/70/0B/wKioL1WwbQqB2FrUAAKR1ynjo0U581.jpg "title=" 3.png " alt= "Wkiol1wwbqqb2fruaakr1ynjo0u581.jpg"/>

5. Here is the route mode.

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/70/0E/wKiom1Wwa2azuPrTAALptodeBwM408.jpg "title=" 4.png " alt= "Wkiom1wwa2azuprtaalptodebwm408.jpg"/>

6. The next level of power is adjustable. The pull-down can be connected to the% ratio, dbm or MW to adjust the power, the default maximum is 500MW.

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/70/0B/wKioL1WwbXzzfWPHAAN4SNhKMMU768.jpg "title=" 5.png " alt= "Wkiol1wwbxzzfwphaan4snhkmmu768.jpg"/>

7. Wireless signal name settings.

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/70/0B/wKioL1WwbaTiGtGzAAOpLDKUZSA477.jpg "title=" 6.png " alt= "Wkiol1wwbatigtgzaaopldkuzsa477.jpg"/>

8. Wireless encryption.

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/70/0E/wKiom1Wwa_WziGfAAAOCgGgAA1A552.jpg "title=" 7.png " alt= "Wkiom1wwa_wzigfaaaocgggaa1a552.jpg"/>

9. The wireless password is composed of at least 8 digits or letters.

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/70/0E/wKiom1WwbBijoLe9AANXZGEsOWo237.jpg "title=" 8.png " alt= "Wkiom1wwbbijole9aanxzgesowo237.jpg"/>

QOS traffic control.

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/70/0E/wKiom1WwbEHB_ZwKAAIQsCc-e-E600.jpg "title=" 9.png " alt= "Wkiom1wwbehb_zwkaaiqscc-e-e600.jpg"/>

restore the factory settings .

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/70/0B/wKioL1WwbkqBCvFeAALyHt9btPQ047.jpg "title=" 10.png "alt=" Wkiol1wwbkqbcvfeaalyht9btpq047.jpg "/>

login account password settings.  

This article is from the "Fiber Network" blog, reproduced please contact the author!

ZTE W815/w615 Wireless Thin AP changed to home wireless router configuration method