3D Printing Cold reality: Low-end market tends to be saturated industrial grade less than 30%

At present, the A-share market has not yet to print for the main business of the listed companies, but in the capital market, 3D printing new technology concept is constantly in the heat-related concept stocks, light rhyme Tatsu, Kim Yun Laser, Han's laser, Chinese laborers technology and other companies were fried. At the same time, many listed companies are in Happy enclosure layout 3D printing project. "Daily economic news" Reporter selected several representative enterprises in the domestic survey found that, due to the complexity and diversity of 3D printing, different enterprise layout of the field has a focus, and are now in the groping stage.

Reporter investigation and analysis of gold laser, light rhyme up to two company samples found, from 2014 months, the gold laser 3D printing plate loss of more than 3 million yuan, while the light rhyme Tatsu more than 1 million yuan operating profit, two also engaged in 3D printing business of listed companies operating on the Gap, To 3D printing This continuous hot industry brought some "cold thinking."

Since 2012, the 3D print concept Unit has continued to be hyped. According to flush statistics, currently involved in the concept of 3D printing a total of 37 listed companies.

So, what kind of industry is 3D printing? At present the domestic 3D printing at what level? Reporter survey found that, compared with developed countries, China's 3D printing still stay in the conceptual level, there is no mature profit model, there is no print for the main business of the listed companies. On the application level, the low-end application has become saturated, industrial application is due to high cost, lack of technology and other issues, the market accounted for only 20%~30%. At present, Han's laser, light rhyme Tatsu, gold laser, such as a small number of laser giants are stepping up the layout of 3D printing field, but the future needs of how much input? What is the market Outlook? Many companies are quietly responding to these questions.

Enterprise together low-end FDM type 3D printing

It is understood that 3D printers are desktop-level and industrial grade, the former mainly civilian, the latter biased industrial applications. Both have FDM (melt extrusion molding), SLA (three-dimensional light curing molding), SLS (selective laser sintering powder), SLM (metal powder rapid prototyping), LOM (laminated solid manufacturing) and other models, of which the FDM type of supplies mainly thermal plastic materials, the rest of the category of many products, metal , resin and so on.

In recent days, "Daily economic news" reporter visited Shenzhen more than 3D printing services and sales enterprises found that most of the enterprise's products are concentrated in the desktop level of the FDM 3D printer, and limited to toys, gifts, exhibitions and 3D images and other low-end markets, for the civil (education industry) and a small number of small and medium-sized enterprises, Most of the export-oriented, price in 2000 yuan, although the stage is sought after, but because of market saturation, fierce competition, customer development is difficult, and even a business has just entered the market in less than a year hastily withdrew.

"If you want to do a 3D printer, now is not a good time," Shenzhen, a technology company in charge of the company was founded in 2013, the original main 3D printer, 3D printing services, etc., but because the former agent of the machine manufacturers no longer produce 3D printer, and market development is difficult, the company had to choose the transition this year.

For why to exit the 3D printing industry, the above person is not willing to talk about, just said, 3D printing its own technology does not break through, the brand of Heteropoly, limited application market, pioneering difficult, "the media fired hot, people also do not use."

Shenzhen Zhi Lei Electronic Technology Co., Ltd. General manager Xiao Yuntao told reporters that the company began to develop desktop-level FDM in the second half of 2012, and began sales in September, but this year May has been active production, instead of developing technology more difficult, more complex technology desktop-level SLA-type 3D printer.

"There are so many desktop-level FDM on the market that almost every other week there is a new machine and profits are falling," he said. "Xiao Yuntao said.

Ofweek Industry Research Center Senior analyst Ye Qidong Analysis, said that the current domestic 3D printing Market cluster desktop-level FDM mainly for two reasons: First, the FDM-type use of printing materials low-cost and adequate supply, while industrial-grade printers, especially industrial-grade SLS type, the need to use metal powder materials, Not only the technical process requirements higher, titanium alloy powder also need to import, expensive; the second is the domestic 3D printing enterprises generally lack of innovative application awareness, the application of 3D printing in the field of applications tightly stuck in print portrait and other small ornaments, industrial structure single.

Xiao Yuntao Introduction, the General FDM type 3D printer accurate to 0.2mm,sla model can be accurate to 0.025mm, printing accuracy is higher, and has been able to mass production.

It is undeniable that 3D printing technology can bring a lot of immediate results. Guangdong Overflow Textile Co., Ltd. Accessories Research and Development Department senior manager Shire told reporters that "in general, 3D printer in the field of textile and apparel use very little", he said that most companies do not know how to better apply this technology, coupled with the current 3D printers have poor printing accuracy and many other problems, industrial-grade 3D printer cost is very high, Many small and medium-sized enterprises cannot afford it.

Youhuan, Director of the Comprehensive Development Research center of the Guangdong Academy of Social Sciences, pointed out that the main or imported products that can be used in commercial production, even the results of the imported equipment with printing supplies, make the domestic commercial 3D printing cost high, so 3D printing has not become the mainstream industrial design and manufacturing enterprises preferred choice.

World 3D Printing Technology Industry Alliance Secretary-General, China's 3D Printing technology Industry Alliance Director Rojun that the current 3D print products users far from the formation of climate, the market can not see the catch, the enterprise also did not realize that they need 3D printer to promote product innovation.

High printing cost in industrial class

Like the desktop level 3D printing, industrial grade 3D printers are also divided into FDM, SLA, SLS, Lom and other models, according to the raw materials and size of the price range, in a hundred thousand of to millions of dollars, more expensive.

Guangzhou Chuan Zheng Science and technology general manager Wanjun that the high price mainly depends on technology. "For example, a normal cell phone and iPhone6 price difference thousands of, because the iphone has app, technology, performance is higher."

"Industrial-grade prices, in addition to some parts of the machine itself, there are raw materials, after-sale warranty, research and development costs, tariffs, training costs, etc., Xiao Yuntao to the daily economic news reporter pointed out that its company was founded in 2012 has developed an industrial-grade 3D printer, but in view of the difficulty of market promotion, After the prototype was finished, the second half of the year to the development of desktop-level FDM models.

Rojun pointed out that the high price of industrial 3D printer is the current dosage has not been opened, the market demand is small, making the unit cost high, in addition, the imperfect technology also let the cost is high.

Reporter survey learned that the current domestic industrial-grade 3D printer market is still 3DSystems, Stratasys, Germany Eos and other foreign giants monopoly, the majority of domestic buyers for state-owned enterprises, central enterprises and other large enterprises, small and medium-sized enterprise buyers.

German EOS in China, an authorized distributor said that the current domestic production of industrial-grade 3D printers are mostly used in military, enterprises with imported products mainly.

Rojun pointed out that this is because the 3D original technology is still in the hands of foreign enterprises, domestic enterprises have been imitated, but lack of capital investment, the lack of leading enterprises.

Not only is the industrial-grade 3D printer itself expensive, but the subsequent cost of raw materials is also prohibitive for most businesses. Foshan New Horse Design Industry Co., Ltd. purchasing manager Ma told reporters that the company has purchased 3DSystems of a value of more than 600,000 yuan industrial 3D printer, mainly for printing plastic parts, but because the cost of resin supplies is too high, has been abandoned, the average price of foreign materials at least 3 times times higher than domestic materials, and must use foreign materials to print out, "The machine is a one-time input, the material is a steady stream of input."

In fact, in the past two years, no matter foreign market or domestic market, the operation of most 3D printing enterprises is not satisfactory. According to the Ofweek Laser Industry Research Center statistics, foreign 3D printing enterprises only 3DSystems and a few can profit, Stratasys, Voxeljet and many other enterprises in 2013 years at a loss, and some even perennial losses. Domestic 3D Printing Enterprises operating conditions are also poor, to set up in 1991, Wuhan Lakeside Electromechanical Technology Industry Co., Ltd. as an example, it is the establishment of the first batch of 3D printing enterprises in China, its products began to apply to the commercial field in 1994, the 2012 revenue of more than 7 million yuan, the loss has reached more than 3 million yuan, By 2013, the company accumulated sales of various types of specifications machine only more than 200 units.

Ye Qidong Analysis, the current 3D printing market in the import phase, because the overall size of the market is too small, some companies are too low sales, resulting in high operating costs, followed. Many domestic enterprises just set up, capital investment and research and development expenditure is too high, some enterprises have not even developed products.

When the reporter asked "domestic in the industrial grade 3D printing of what leading enterprises", an industry personage laments that, at present, it is difficult to find out how to do well.

But the daily economic news reporter noted that a small number of laser giants have turned to aim at the industrial grade 3D printing, to light rhyme Tatsu, Han's laser-headed laser listed enterprises have a happy enclosure layout, but the current industrial applications still lack of heat, the market has not yet matured. When the reporter asked about industrial grade 3D printing business progress, a number of listed companies have chosen low-key response, or even avoided.

Before and after the Spring Festival, Han's laser set up a 3D printing division, members of more than 20 people, and the interactive platform in Shenzhen Stock Exchange said that the company plans to complete the prototype production, such as the time is ripe will be pushed to the market. However, recently in an interview with reporters, Han's laser securities business representative Wang is quite concerned about, "we do 3D printing just want to prove that we have this ability, the end of the prototype is still not good to say, 3D print now or not to talk about, everything is still unknown."

Light Yun Tatsu plans in the future in Shanghai, Shenzhen, Beijing, respectively, the establishment of 3D Printing Service Center, the business will be the layout of the country, equipment size will reach more than 20 units, the cumulative investment of hundreds of millions of yuan. Shanghai Center will be for the automotive, aerospace, medical, electronic devices and other fields, the Beijing center is mainly automotive and aerospace, and the Shenzhen Center will be oriented to mold and electronic market. However, in an interview with the Daily Economic news reporter, Rong, a securities representative, said at present, are not completed, but also in the plan, depending on the specific circumstances, "is originally a new business, the front has not done a good job, not blindly everywhere to vote, if an industry development prospects are very good, customer base and business base, The company will definitely invest more.

Referring to the current development of 3D printing in medical and automotive fields, Rong said the company's auto parts, which were printed through 3D, were mainly used for customer research and development. She pointed out that the current health care has just been involved, but also in the early stage of construction, there is uncertainty, for investment and the market can not be informed.

Guang Yun, a staff member also said that the current medical 3D printing is still in progress, has not yet earned income, because it involves medical certification and clinical trials, time is long.

But Ye Qidong said that at present, light rhyme Tatsu is only a 3D printing application service provider, according to the Ofweek Industry Research Center Statistics, the current global 3D printing output value, service business ratio accounted for only 9.5%.

Rojun pointed out that the current desktop-level 3D printer market share has reached 70%~80%, while the industrial level only accounted for 20%~30%, industrial-level future growth space is very large.

For why the 3D printing industry is constantly being overweight, Jin Yun Laser Chairman Liang repeatedly said in recent years, 3D industry, all over the country have large enterprises involved, the entire industry is likely to complete the shuffle in two years, if which company can not keep pace, may be thrown out of the first echelon, or even eliminated by the market.

"3D printing has always been the focus of technical attention of Chinese laborers, last year we took part in the Huake three-dimensional to do 3D printing equipment research and development sales, we have been in the industry in the use of laser processing technology, and 3D printing technology has a certain degree of relevance, but we are not called 3D printing, the company mainly consider the future industrial development, The 3D printing and our existing laser technology to make some of the combination of ", the Chinese labor Science and technology director of the relevant people in the daily economic news reporter interview," replied. The person said that the Chinese laborers technology has always had 3D printing technology, the technology in the metallurgical industry only more commonly used, so the company did not make too much explanation, also did not mention and 3D printing relationship.

Hundreds of millions of market space to be excavated

How big is the 3D print market?

According to data from the 3D Print Technology Industry Alliance, the global 3D print market in 2013 was about $4 billion trillion, almost doubling compared with 2012. Wanguo said that the future of the printing industry in the manufacturing sector accounted for 2%.

Rojun predicts that, from recent years of market development, 3D printing can at least maintain a growth rate of more than 40% in the future for a considerable period of time.

It is noteworthy that the current domestic 3D printing application polarization: One is used in 3D portrait, small objects and other materials, low cost, technical technology rough products; one is applied in aerospace and other high-precision, high-quality products.

In contrast, foreign applications are more comprehensive, such as consumer goods and electronics, automobiles, biomedical, aerospace, military, mechanical manufacturing have applications. "Technical characteristics determine that 3D printing is very suitable for small-volume customization of products, complex product processing, or product development phase prototype manufacturing, in these areas will be fully applied in the future." Ye Qidong points out.

"From 3D printing in the industrial, biomedical, cultural and creative areas of potential market, at least hundreds of millions of yuan in the domestic market space." Rojun added.

According to the 3D Printing technology Industry Alliance data shows that in the next few years, China's 3D printing market will grow at least one times a year.

The latest forecasts, published by Gartner, an international research consultancy, suggest 2015 Global 3D printer shipments will reach 217,350 units, higher than 2014 108151 units, 2015 to 2018, 3D printer shipments are doubled each year, is expected to be more than 2.3 million units in 2018.

Gartner Research Vice President Petebasiliere said that the 3D printer market is at a turning point, since 30 before the invention of the printer, the annual growth rate of unit shipments in single-digit to 10 digits between the low-grade, but 2015 is expected to increase significantly, The main push-lift path includes low prices, steady performance improvements and can be bought all over the world.

and the introduction of relevant domestic policies has also made this emerging industry more attention. September 25 this year, Su, vice Minister of the Ministry of Industry in Shaanxi Weinan "3D Printing and biological medical equipment industrialization," revealed that the Ministry of Industry is leading the formulation of "National production development Plan (2014-2016 Years)" (hereinafter referred to as the "advance Plan"), the "Promotion plan" by the Ministry of Wei Planning Commission, the State Food and Drug Administration and the Ministry of Science and Technology, such as joint development, the draft has been completed, is expected to be introduced this year, this will be the first 3D printing industry plan.

In an interview with the Daily Economic news reporter, Rojun said that the national strategic planning, support and cultivation of 3D printing technology from the top design will help 3D printing technology play an important leading role in the process of transformation and upgrading of traditional industries.

Ye Qidong that at present, the gross profit margin of 3D printing enterprises in foreign countries is 44%, and the gross profit margin of 38% is higher than that of domestic laser enterprises, and with the popularization of 3D printing, the operating income of domestic 3D printing enterprises will increase greatly, meanwhile, the production of enterprises has gradually scale effect, The company's management, sales and research and development and other operating costs will decline, 3D printing business can contribute to a stable performance.

《《《

Industrial Grade Sample

Light rhyme up to 3D print dabbled in medical industry automotive applications are still in the experimental period

Every trainee reporter Ouyangkeb from shenzhen

As a small number of domestic laser enterprises will be targeted at industrial grade 3D printing, light rhyme Tatsu (300227, closing price of 21.67 Yuan) has been in the investor Exchange platform, said the plan in Shanghai, Shenzhen, Beijing, respectively, set up 3 3D Printing Service Center, the business will be the layout of the country, equipment size reached more than 20 units, the cumulative investment of hundreds of millions of yuan. Among them, the Shanghai Center will be for the automotive, aerospace, medical, electronic devices and other fields, the Beijing center will be mainly automotive and aerospace, and Shenzhen Center will be geared towards the mold and electronic electronics market.

However, in a recent interview with the Daily Economic news, the company's chief executive said that the above targets are not yet completed and are planned, depending on the specific circumstances.

Automotive applications mainly for customer research and development

Last September 11, light Yun Tatsu and natural person Wang Bowen Joint venture set up Shanghai Light rhyme Tatsu Three-dimensional Technology Co., Ltd., mainly engaged in 3D printing technology services, manufacturing and design application development. The registered capital of the JV company is 20 million yuan, the light rhyme up to 12 million yuan, holding 60% of the shares. It is reported that the lighting of the layout of 3D printing in advance mainly concentrated in the automotive and medical fields.

In October of that year, materialise and Belgium signed the "three-dimensional printing Racing Project cooperation Framework Agreement", planning to use a year to produce a driving electric or solar car racing. Subsequently, the two sides together with Tongji University Automotive Institute to apply the printing technology to the car.

July 9 This year, the three-party cooperation of the car successfully unveiled and commissioning. It is reported that the car using 3D printed parts of more than 300, accounting for the total number of mechanical structural parts of the 30%. However, Light Yun Tatsu Foreign said that this research and development project does not directly bring revenue to the company, but effectively expand the 3D printing technology in the automotive field of application, for the future expansion of automotive and other industries 3D printing large-scale business to lay the foundation.

Ofweek Industry Research Center Senior analyst Ye Qidong told reporters, at present, 3D printing high-volume applications in automobile manufacturing is not realistic, the traditional mold manufacturing industry also has obvious advantages, in the automotive field, although there are several examples of printing cars at home and abroad, but also only part of the printing parts after the assembly, It's a long distance to print the whole car.

Champ Analysis Shi Mingxia that the current 3D printing technology does not print all the materials used in automobiles, the surface quality of printed products to be upgraded, the interface between the printing software and automotive design software is also problematic. The new technology is certainly the future development trend, but does not guarantee the product quality as well as the downstream customer demand market situation, the enterprise certainly will not blindly increase the investment.

Take the foreign 3D printing technology giant Stratasys Company as an example, the company has to provide services for automobile enterprise customers, but the service content is still limited to the interior of the car decoration parts, widgets and small buttons.

"Light Yun Tatsu in the 2014.5 Annual report, the company's 3D printing car development project has been completed, began to enter the medical field." It can be seen that the strategy of optical rhyme is biased towards the beginning of technology research and development, obtain certain achievements and customer recognition, and then enter the market. "Mingxia pointed out that the early development of new technologies, whether it is the printing of raw materials, printing technology, printing accuracy, or whether the downstream customers are buying, are related to the profitability of the enterprise.

"To ' print ' a metal screw diameter of one centimeter, for example, about 1.5 hours, the cost is about 120 times times the traditional process, not a car companies can afford." "Ye Qidong points out.

In this respect, the Director of the office said the company through the 3D printing of automotive parts are mainly used for customer research and development phase, "research and development will be modified, not finalized, if only to do one or two first, with open mode, mold cost high and time-consuming, by contrast, with 3D printing will certainly save time and cost." ”

Medical applications involving certification and clinical trials

In addition to the automotive sector, light Yun Tatsu is also trying to extend the print to the medical field, its 3D printing medical division is currently under preparation.

Some insiders told reporters that the light rhyme up after years of research and clinical trials, at present in the "model, surgical guide and personalized implants," and other medical device products, has the industrialization of the development of the basis and the possibility of the future or will first enter the field.

"If the light in the 3D printing start stage, can make full use of their own technology and market advantages, as soon as possible to launch products to seize the market and establish industry brands, then when the 3D printing into the rapid development phase, it is bound to occupy a higher market share, become the industry ' leader '." said the person.

But for the specific situation of investment, light Yun Tatsu Securities representative Rong said temporarily can't tell, the company's 3D printing business has just been involved in medical, but also in the early stage of construction, there is uncertainty. A staff member of the company's office also said that the time to achieve medical 3D printing was still long due to medical certification and clinical trials.

The most common application of 3D printing in the medical field, Ye Qidong said, is the use of implants such as metal skeletons, such as those implanted with 3D-printed titanium bones in the patient's body, with more than 30,000 cases in Europe. 3D printing is also widely used in the production of dental implants and dental braces. At the same time, because the medical customer price affordability is usually strong, which also solves the problem of high cost of 3D printing manufacturing.

However, Light Yun has not yet self-developed industrial grade 3D printers, still rely mainly on the import of German EOS laser sintering equipment and materials.

Light Yun Tatsu Chairman Hou Johong has said that the light Yun Tatsu into the 3D industry will follow the automotive, machinery, medical, aerospace, and eventually into the field of mass consumption, the future will also enter the 3D printing materials and equipment research field. In this regard, Rong said that the company is not involved in equipment, the future will be put into research and development depends on the business situation.

Be favored by multiple organizations

"There is no room for future imagination. "Compared to the light rhyme Tatsu cautious, a number of institutions are optimistic." Wanguo's research reports that, considering the company hatching 3D printing applications will continue to explode in the next few years, the forecast two years after the light Yun Tatsu revenue will reach 612 million yuan. And 2013 Light Yun Tatsu revenue of only 174 million yuan.

However, the first three quarters of this year, the company has completed its operating income of 175 million yuan, up 41.66%, the realization of the listed companies ordinary shareholders of the net profit of 19.3168 million yuan, up 29.62%. Light Yun Tatsu said that the company's 3D printing business, although the plan to proceed smoothly, but the new business significantly improve the company's performance is still uncertain, need time to accumulate.

From the main business of light rhyme Tatsu, including templates and ancillary products, precision metal parts, laser molding, ultraviolet laser drilling, HDI drilling, LDS, 3D printing and trade and other. Among them, 3D printing in this year's semi-annual report for the first time listed, revenue 3.37 million yuan, accounted for 3.09%, gross margin compared to other areas in the lower level, less than 40%.

An analyst who declined to be named expects the 3D print business to be tens of millions of dollars next year, with revenues expected to exceed 10% in two years. Mingxia also predicted that the future of light rhyme up to 3D printing business margin level is expected to break 50%, it is possible to become a template and ancillary products outside the business of another important revenue business.

《《《

Desktop-level samples

US laser Innovation Profit model 3D printing business it will take time

Every trainee reporter Ouyangkeb from shenzhen

The main research and development direction will be located in the civilian desktop-level gold laser (300220, closing price of 34.62 Yuan), the first half of this year has announced the implementation of 3D print desktop-level models of mass production. Liang, chairman of the company, has disclosed that it will complete the preliminary framework of 3D print eco-circle within microbicides.

The company's 3D printing business is also gradually advancing, this year's three quarterly display, Gold laser in the first three quarters of the 3D print business revenue breakthrough tens of millions. However, the gold laser in the financial statements, 3D printing related industrial chain eco-circle in the development and investment period, although the breakthrough tens of millions, but still not achieve the overall profitability of the plate.

3D printing business still in loss

This year, the concept of 3D printing by the capital market hot, related stocks were taken turns speculation. From the end of April to the lowest 9.32 yuan/shares (before the right to reinstatement) to October 13 the highest touch of 46 yuan/share, Gold Yun Laser shares 5.5 months rose nearly 4 times times.

A number of institutions reported that the gold laser is in transition, 3D printing cloud platform business imagine a larger space. Hongyuan Securities are expected to gold laser 2016 revenue compared to 2013 will double, reaching 367 million yuan.

US laser current main business includes metal Laser series, cutting bed series, vibration mirror and carved series, X-Y axis series and 3D printing business, of which the printing business revenue accounted for the entire main revenue of 8.14%. The first half of this year, the gold laser operating income of 90.83 million yuan, which printing business revenue for 7.39 million yuan, loss of 1.65 million yuan. The first three quarters of this year, the company's operating income of 136.89 million yuan, 3D print business revenue breakthrough tens of millions.

Forward-looking industry veteran industry analyst Li Peijuan to the daily economic news reporter said that for the transition of the gold laser, the loss is normal, especially upfront investment, but from the financial data, compared to light rhyme up to a slightly larger advantage.

To build 3D print ecological circle

US Laser Chairman Liang previously disclosed, is in Wuhan headquarters to build "3D print Designer Club", trying to create a "five-star Design Center" to provide free work design room, and will be completed in the Microbicides 3D print eco-circle of the initial framework. Liang is quite confident that "the single link in the 3D print ecosystem may be easy to imitate, but a complete biosphere is hard to replicate." ”

Last September, Jin Yun Laser announced the establishment of a "3D Printing Cloud Factory plan", and contributed 15 million yuan to acquire Wuhan 3D Dream Pavilion, 3D of the network of partial equity.

Data show that 3D intended to build the network mainly online, selling a variety of 3D printing creative products and on-line customization, the platform has been officially launched this June. Reporters from the platform to see, the sale of various types of creative gift prices from hundreds to thousands of yuan, the highest also has 4250 yuan. In addition, there are the assigned designers to design 3D printing model for customers.

3D Dream Hall is based on the experience of the main museum, has opened around the country about 40 stores, to join the main, mainly to provide full-color 3D printing wedding sets, 3D print real image and many other experience services.

The relevant director of the museum to the reporter introduced, at present, the business is very good, the general store within a few months will have revenue, concentrated layout in the business-intensive areas, Changsha 3D printing Experience Hall area of the largest, to more than 200 square meters, "the cost of joining costs in general between a hundred thousand of to millions, the joint venture shop costs at least millions of".

In addition, the person in charge also introduced, 3D means to make net now have million revenue, but because of Wuhan's 3D printing plant late input cost, still not realize profit, "at least a few billion input, machinery and materials very expensive, basically want to purchase." ”

For the 3D printing business in the future to contribute to the company how much profit, Jin Yun laser director of the secret office did not disclose.

Champ Consulting Analysis Shi Mingxia The Daily economic news reporter said, "Short-term turnaround time, 3D printing business or will become one of the key development of gold transport laser business, bring profits can not be underestimated, but the company will not reduce the importance of other business, short-term revenue share will not have a large float, but in the long run, 3D printing business may encroach on other business revenue weightings. ”

The 3D printing business of US laser is gradually advancing. October 22 this year, Jin Yun Laser holding subsidiary Wuhan Landing Creative Culture Communication Co., Ltd. with Zhongshan Guzhen Town Productivity Promotion Center, Wuhan University Technology transfer Center in Guangdong province Zhongshan Guzhen signed a cooperation agreement to explore the 3D printing technology industry application expansion of the new model.

The tripartite cooperation between the school and Enterprise is regarded as the proof of exploring more profit and cooperation mode. Mingxia that for 3D printing technology development, this move will be combined with the specific traditional lighting industry, more targeted to downstream customers. At the same time, the three-party joint of school-enterprise administration, sharing risk, will help to make up the losses before the enterprise.

Hongyuan Securities Related Research also pointed out that the gold laser lighting in the field of cooperation, is 3D to create a network test surface to the industry's application of 3D printing service began.

(Responsible editor: Mengyishan)