Hands-on teaching you to install Windows 2000 diskless workstations

&http://www.aliyun.com/zixun/aggregation/37954.html ">nbsp; The principle of diskless workstations is that there is a system server in the network, and this system server requires a workstation to run the operating system in addition to the operating system it needs to run. Diskless workstation does not have a hard disk in the chassis, other hardware (such as motherboards, memory, etc.), and diskless Workstation network card must have a bootable chip (the general network card is not available, can be guided chip can be bought). The bootable chip on the NIC during the diskless workstation startup retrieves the required data from the system server for use by the user.

The simple word is, diskless workstation is actually the hard disk and host separation, diskless workstation only perform operations do not perform storage.

Diskless workstations are enabled by a combination of hardware (workstation-side) and software (server-side). Software, is the server on the remote boot-related services and diskless system software, hardware, the Workstation network card on the Bootrom chip. Of course, for motherboards that are not very old, their bios is more idle and supports writing, the Bootrom chip code can be written to the motherboard BIOS, saving a chip.

The more commonly used diskless start-up chips are RPL and PXE two. These two are more general, others have developed a special chip, not very popular, the following discussions are mainly RPL and PXE.

The RPL chip can be used for 10M and 100M network cards, for NT (2000) and for NetWare. The different network card uses also dissimilar, needs to support. So do not have a disk without any network card can do. 10M NE2000 and 8029 network cards, 100M 8139 network cards and so on support RPL chip, and also easy to find the corresponding RPL chip.

The PXE chip is generally used for 100M network cards to be the most mature and typical in 8139 network adapters, and it is even easy to find the PXE chip code for the 8139 network card (for writing to the motherboard or blank boot slice). Now more common is that kind of rpl/pxe dual-boot bootrom chip, the price is about 6 yuan.

Install Windows Advanced Server + SP4

Installing Windows 2000 terminal components

Note: When installing the Win2000 system, it is important to note that when customizing Windows components, install and install only "Terminal Services", other components do not have to install, the installation date after 10 years, so you can not install Terminal Services Licensing.

Most of the accompanying games can be installed, but must not be able to install "desktop Marbles". Because the CPU occupancy rate of this game is as high as 90%, if there are two terminals running this game, the entire network is over!

The network properties of the WIN2000 server require four protocols to be installed:

NETBEUI Kyoto
Internet Protocol (TCP/IP)
Ips/spx protocol
DLC protocol

Install MetaFrame 1.8 and SP3 patches and related client update packages.

MetaFrame 1.8 Registration Options:

OEM METAFRAME 1.8 for WIN2000 number of users: 100
CITRIX User LICENSE PACK number of users: 100
CITRIX LOAD Balancing SERVICES user number: no change!
CITRIX installation MANAGEMENT SERVICES user number: not to be changed!
WinFrame SERVER OPTION PACK Number of users: no change!
METAFRAME RESERVED OPTION PACK1 Number of users: no change!
METAFRAME RESERVED OPTION PACK2 Number of users: no change!
METAFRAME RESERVED OPTION PACK3 Number of users: no change!
METAFRAME RESERVED OPTION PACK4 Number of users: no change!
METAFRAME 1.8 FEATURE Release 1 Number of users: not to change!
METAFRAME 1.8 FEATURE release-update Number of users: not to change!