Linux Iwconfig configuration Wireless-tools

The majority of Linux's 802.11a/b required toolkit has been installed by default, and its main advantage is that you don't have to be like linux-http://www.aliyun.com/zixun/aggregation/29942.html ">wlan, Reinstall the kernel every time you upgrade it.

After installing Linux compatible NICs, you need to configure your NIC's IP and wireless settings before using wireless tools.

You can configure your NIC's IP like a generic Ethernet, and after starting the NIC with the Ifup command, he is not able to function properly because the wireless settings are not yet configured.

The most commonly used command in wireless Tolols is Iwconfig, which allows you to configure most wireless parameters, including SSID and wireless mode. As for wireless mode, consolidator means there is a wireless access point (WAP) on the network, while hoc means no.

For example, your wireless card is named Eth0, with Consolidator mode, Essid is homenet, then your command will be:

Your NIC will be fully functional and you will run these commands every time you use the Ifup command, and there may be some errors in forgetting these commands. The next stage will explain how to set changes once and for all.