Tree-shaped solar cells: from charging to start environmental protection life

There are a lot of portable solar chargers on the market, but the ability to collect sunlight is not strong. The interesting surrounding online store Brando introduced a big improvement in the solar cell tree, the following a look at this novelty products! The fun surrounding online store Brando launched a portable solar charger, the tree-shaped structure to allow it to better receive the sun to provide electricity, the novelty of the appearance can also attract consumers eye. The USB-output solar cell has a 3000mAh lithium-polymer battery that can be recharged by solar energy or power supply. In the case of the sun, the solar energy is directly charged to the equipment, the equipment is full of the battery, in the absence of sunlight through the built-in battery charging, 3000mAh enough for most of the equipment used. A USB jack can output 5v/1000ma power, enough to support most devices. The battery is equipped with 9 solar panels, three trunks and 9 connectors, but it is not attached to the Apple 30-pin cable, so Apple users will need to prepare their own data cables to use the product. The use of this product needs to assemble itself, fortunately, the assembly method is very simple, first connect the trunk and the base of the line, and then install the solar panels to the trunk, and finally the trunk card into the base can be. After being assembled, there are 3 solar panels on each trunk, like a leafy tree. The battery base size is about 236 x 214 x 200mm and is very convenient to carry. This product is not only environmentally friendly, but also can solve emergency needs. The official website is priced at 55 dollars.