Win98: Instant Start One method

Do you think Win98 more than a minute http://www.aliyun.com/zixun/aggregation/18052.html "> Start too slow?" Here's a quick way to improve the Win98 start rate--turn on the STD feature.

Step 1: Check the motherboard chip. For Intel, the South Bridge uses the 371AB/EB chipset and its subsequent motherboards, which provide STD support via the South Bridge 586B Chip and its subsequent South bridge chip.

Step 2: Select control panel → system → Device Manager → system equipment → Plug and play bios → properties → driver → upgrade driver, and select "Advance Revisit and Power" in "All Hardware". " Interface (ACPI) BlOS, follow the prompts to insert the Win98 disc, and then reboot, then the system will be prompted to find new hardware, the final confirmation.

Step 3: Go to Control Panel → power management → hibernate to set the Hibernate function. In the Enable Hibernate support option box, and then go to Control Panel → power management → advanced, change the Press power button to hibernate.

Step 4: Take out the motherboard CD and copy the inside ZVHDD.EXE file to the hard drive.

Step 5: Then reboot the computer, go into the DOS environment, execute the ZVHDD.EXE file, and then use the "Zvhdd/c/fiie" command, which prompts you to reboot the system if the operation is correct. After the reboot, you can see that there is a row of "On-suspend FAT32 file reserved" After the 11585.html > Hardware Device table and the S.M.A.R.T state of the hard disk display, which indicates the installation was successful.

So in the Win98, click the power button, you can see the hard drive lights flashing constantly, then you can hear the beep, probably wait until the 5th sound, the motherboard will automatically turn off the power. When starting again, is familiar with the hardware detection screen, in the presence of hardware configuration table, you will see a new screen, and will tell you how much has been started, wait until 100%, you can enter the Win98 desktop.