Windows XP hard disk partition capacity resolution Tips

&http://www.aliyun.com/zixun/aggregation/37954.html ">nbsp; When you use XP, whether because the partition is not ideal and distressed, whether you have to reload the system for this and whether to look around for software. In fact, this is not necessary, as long as not C disk (refers to the system disk) can be done under XP. This method can solve the problem that the hard disk partition capacity is sufficient in some software use.

First of all, a few points:

1, can not adjust the system disk.

2. The data on the adjusted disk will be lost (can be moved to the disk without any heavy points).

Operation Steps:

1. Close all applications, open Control Panel, open Administrative Tools, and open Computer Management.

2, in the left column to select "Storage", and then select "Disk Management", on the right will show your computer's disk partitions, the lower right appears the partition diagram, which is where we want to operate.

3. Right-click the partition you want to modify and select "Remove logical Drive" from the pop-up menu (attentive friend may have found that you can also modify the drive letter, such as your computer has 3 partitions, CD-ROM is d, you want to change it to F, you do it here, and then choose OK.

4, with the above methods to delete the number of partitions to be modified, the deleted partition capacity will be automatically added to display as unassigned (with Black to mark, has been divided that is not changed to display as blue).

5, then repartition, on the unassigned block, that is, the black block Right-click, in the pop-up menu select "New Logical Drive"--click "Next"-"next".

6. Enter the partition capacity value in the partition size column. (The default value is the total size of the unpartitioned, if you just want to divide a section, then do not change, if you want to new divided into a few areas, then re-enter the value bar, but in the last section, to take the default value, this reason I do not have to say more. ) (1G=1024MB), click Next.

7, adjust the drive letter, generally do not have to change, directly click Next.

8, choose whether to format the new partition, usually choose format, there are three selected top: I, is the choice of disk file system, personally think or choose FAT32 Good, II, the second top without tube; III, the third top is to give the disk a favorite name, always "Local disk" no new ideas). And it's best to check the "Perform Quick format" one, otherwise the formatting process will be slow. Then "Next"-"finish".

9, repeat 5--8 step, separate the other partitions to be reclassified. At this point, we have realized that the partition of the computer has been adjusted without any other third-party partitioning software.