您已經配置此虛擬機器使用64位客戶作業系統。然而,64位作業系統不可用。此主機具有虛擬化支援能力的,但虛擬化技術被禁用。
這通常是因為虛擬化技術已經在BIOS /韌體設定或禁用或主機沒有許可權改變此設定。 請:
(1) 驗證 BIOS/韌體設定 VT 啟用和禁用 'trusted execution.'
(2) 如果更改了這些 BIOS/韌體設定 重新啟動主機電源。
(3) 安裝 VMware Workstation,重新啟動主機.
(4) 更新到最新版本的 BIOS/韌體。
更多詳細資料請參閱 http://vmware.com/info?id=152 。
不支援 64 位元的情況下繼續嗎?
上面為中文漢化版提示,英文原版提示如下:
You have configured this virtual machine to use a 64-bit guest operating system. However, 64-bit operation is not possible. This host is VT-capable, but VT is disabled.
This is usually because VT has been disabled in the BIOS/firmware settings or the host has not been power-cycled since changing this setting. Please:
(1) Verify that the BIOS/firmware settings enable VT and disable ‘trusted execution.’
(2) Power-cycle the host, if either of these BIOS/firmware settings have been changed.
(3) Power-cycle the host, if you have not done so since installing VMware Workstation.
(4) Update the host’s BIOS/firmware to the latest version.
For more detailed information, see http://vmware.com/info?id=152.
Continue without 64-bit support?
在VMware下成功安裝了Windows Server 2003,再安裝64位版Windows Server 2008 R2 Enterprise的時候,遇到了上面的錯誤提示,不能繼續安裝系統。電腦本身是64位windows7,所以應該可以肯定CPU是支援64位系統的,下面說一下我的解決方案:
1.檢查CPU是否支援VT,可以用CPU-Z查看,看到VT-X,說明CPU是支援虛擬化的
2.開啟VT,有很多CPU是預設不開啟VT的,需要自己手動在BIOS中修改。以我的thinkpad為例:
a)先關機,不能通過重啟進入BIOS,需要先關機,再開機
b)按F1進去BIOS
c)進入config-CPU ,可以看到有兩項是disable狀態,改成enable。
d)F10儲存退出重啟
3.重新安裝VMware
完全卸載VMware,安裝過程很簡單,不多說。不重新安裝VMware的話還是有這個問題的。
放心卸載VMware好了,重新安裝VMware後,原來安裝成功的系統還是在的,沒有任何影響。
4.安裝系統
這個也很簡單,也不說了。