VMware 複製CentOS 後無法啟動網卡的解決

標籤：generated   address   change   single   modify   

將原有的eth0的那一行注釋掉，然後將產生的eth1改為eth0（如果沒有這個檔案，可以新增這個檔案解決）

[[email protected] ~]# cat /etc/udev/rules.d/70-persistent-net.rules 
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.

# PCI device 0x8086:0x100f (e1000)
#SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8c:61:3e", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x8086:0x100f (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:3c:e6:09", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
[[email protected] ~]#

最後修改網卡的設定檔

[[email protected] ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 
DEVICE=eth0
TYPE=Ethernet
UUID=fb802c67-087a-4f50-812b-f3d20053aa4b
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=none
HWADDR=00:0C:29:3C:E6:09
IPADDR=192.168.100.212
PREFIX=24
GATEWAY=192.168.100.1
DNS1=192.168.100.1
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth0"
[[email protected] ~]#

最後重新啟動系統

本文出自 “Sim'blog” 部落格，請務必保留此出處http://mitac.blog.51cto.com/1081911/1629060

VMware 複製CentOS 後無法啟動網卡的解決