解決：Loading kernel module CAP_SYS_MODULE CAP_NET_ADMIN alias

複製虛擬機器、啟動、配置網路、重啟網路服務遇到如下問題：

[root@localhost ~]# service network restartLoading kernel module for a network device with CAP_SYS_MODULE (deprecated).  Use CAP_NET_ADMIN and alias netdev-eth0 insteadLoading kernel module for a network device with CAP_SYS_MODULE (deprecated).  Use CAP_NET_ADMIN and alias netdev-eth1 insteadShutting down loopback interface:                          [  OK  ]Bringing up loopback interface:  lo: Disabled Privacy Extensions                                                           [  OK  ]Bringing up interface eth0:  e1000 device eth0 does not seem to be present, delaying initialization.                                                           [FAILED]Bringing up interface eth1:  e1000 device eth1 does not seem to be present, delaying initialization.                                                           [FAILED]

查看網路介面，結果如下：

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00    inet 127.0.0.1/8 scope host lo    inet6 ::1/128 scope host       valid_lft forever preferred_lft forever2: eth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000    link/ether 00:0c:29:9e:85:f7 brd ff:ff:ff:ff:ff:ff3: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000    link/ether 00:0c:29:9e:85:01 brd ff:ff:ff:ff:ff:ff

發現重啟網路失敗了，相應介面沒有啟起來，這裡應該是eth0和eth1，但是卻有eth2和eth3

解決方案見：http://haoyun.blog.51cto.com/2038762/1220485

本文出自 “好運” 部落格，請務必保留此出處http://haoyun.blog.51cto.com/2038762/1301083