Daemon Tools 4.x 或”SPTD.SYS”導致Windows不能啟動的問題的解決方案

Ensure you've latest SPTD layer version installed (currently v1.42):
http://www.disc-tools.com/download/sptd 確信你安裝了最新的SPTD.

If your system has some problems with SPTD installation you can do as follows:

 若安裝SPTD出現問題導致系統故障,請按下述方法解決:

If your OS is already running then go to step 2 directly.
If you cannot boot your PC at all then start from step 1.  如果作業系統可以正常啟動,直接進行第2步,否則從第1步開始做起.

1. Boot in safe mode and press ESC key when you see on bottom line of display:
"Press ESC to cancel loading SPTD.sys". This will abort loading of SPTD layer.  1.以安全模式引導Windows,當出現"Press ESC to cancel loading SPTD.sys"提示時,按ESC鍵跳過,該操作將取消SPTD的載入.

2. Open registry editor (run regedit) and browse to the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\sptd
Change the value "Start" (DWORD) to 4 (i.e. disabled).
[To re-enable SPTD service change the "Start" value back to 0.] 2.開啟登錄編輯程式(在命令列輸入regedit),在HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\sptd鍵下,將Start的值改為4(禁用),要啟用則為0.

3. Reboot again in normal mode and check if your issue is solved.

 3.重啟,看看問題有沒搞定. 下面的就不翻譯了,英文好的自己看,或者用詞霸!

In case you had BSOD/crash you can check for minidump (in Windows\Minidump folder) related to that crash, send newest file to support@daemon-tools.cc with exact problem description.
Do NOT send minidump, if your problem is solved after removal of Starforce drivers! (Check this thread.)

Note that you have to change the Start value in registry back to 0 in order to get SPTD layer working again and Daemon Tools, too (see #2).

You can also download sptdinst.exe (in our download section) for your Windows version (i.e. sptdinst_x86 for 32bit Windows, spdtinst_x64 for 64bit Windows) and execute "sptdinst remove", reboot to complete de-installation.

If you are unable to boot into safe mode even if you pressed ESC when prompted, boot with your Windows cd into recovery console, log on to your Windows installation (requires Administrator password), and enter disable sptd (this will disable SPTD service). Reboot to check if your issue is solved.
Note that you have to (re-)enable sptd service after the problem causing the crash is solved in order to get Daemon Tools working.__________________
Everybody be cool! You, be cool!
They'll keep fighting! And they'll win!