升級我的ipaq hx2110到Windows Mobile 6.0

我的ipaq hx2110是英文版的，裝了中文IME後沒有配置好，系統幾乎崩潰，無法使用，就想升級到WM6看看。從網上找到的升級教程，應該是一個俄羅斯的大牛搞出來的，從下載來的升級包中可以看到很多俄文，這個升級過程需要使用不同的nbf檔案來回刷機三次，才能進入WM6，時間有點漫長，不過總算順利。

1) Hard reset iPaq. Do this by holding the calendar button and itask button (curved arrow), and then put your stylus into the reset hole on the bottom of the iPaq. This will hard reset it.
2) After doing that, put it in to bootloader mode. You do this by holding the contact button (to the right of the calendar) and the itask arrow, and then clicking the reset button on the bottom. It should now be in bootloader mode. unplug the power/usb cable and plug it back in. hit the calendar button. it should now say USB.
3) run hpRUU.exe under the Wm5.0 for hx2000_1.00.00.L_ENG folder. It's found in provishki. it will flash your ipaq to 1.00.00.l . let it flash all the way.
4) hard reset the ipaq and put it in bootloader mode. see steps 1 and 2. make sure it says USB.
5) do step 3 again, but this time don't click upgrade. rename the E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf file to 100l.nbf

重複第3步，這裡一定要注意操作順序，先點出hpRUU.exe，等檢測到PDA之後，upgrade按鈕出來之後，再重新命名E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf file 為 100l.nbf，我第一次升級時，沒有注意順序，先重新命名檔案，再運行hpRUU.exe結果hpRUU說我的sku號碼不對，不能升級。
6) go into the SP32408_1.00.00.H_ENG folder and get the NBF file from there. copy it into the 1.00.00.L folder that we were just in. rename is to E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf. click upgrade. let the upgrade finish.

進入SP32408_1.00.00.H_ENG 檔案夾，將NBF檔案拷貝到
7) repeat steps 1 and 2.
8) delete the E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf file that you just copied over and rename the 100l.nbf file to E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf.
9) run hpruu.exe again. DO NOT CLICK UPGRADE.
10) get the wm6_wwe.nbf file and copy it into the directory we were just in. rename E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf to 100l.old and wm6_wwe.nbf to E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf
11) click upgrade. let it finish.
12) repeat step 1
you should now have Windows Mobile 6 on your iPaq. Good luck

附帶我的ipaq：

原始升級包下載比較麻煩，有200多M，但實際上針對hx2110有很多檔案用不到，我就做了些精簡，重新打了一個包，只有90多M。

原始包：

http://depositfiles.com/en/files/1799963

我的包：

找到上傳空間後再寫。