imx6 module

method:Input after power on: ifconfig eth0 down will eth0 off, because he will conflict with the module.Then enter the command under/ETC/PPP:PPPD Call wcdmaKeep it running in the background, if the migration succeeds, it will print some information, and the following is the last part of the interception:CHAP Authentication SucceededCHAP Authentication SucceededSent [IPCP ConfReq id=0x1 RCVD [IPCP ConfReq id=0x0]Sent [IPCP Confnak id=0x0 RCVD [IPCP confnak id=0x1 Sent [IPCP ConfReq id=0x2 RCVD [

In the "can_485_module_v1.x" Hardware data compression package, provide a schematic diagram of the Cadence format andSchematic diagram of PCB, AD format and PDF format.The Linux driver for the 485 module is the "drivers/char/max485_ctl.c" file in the kernel directory, the default kernelThe driver is already included in the image.The test routine provides a "Schindler itop-imx6-minilinux-rs485_v1.x" compress

How to compile Linux kernel, imx6 compilation method 1. Handle environment variables first, ensure correct environment variables and tool chains: Export path= $PATH:/home/xrz/pa100_toolchain/opt/freescale/usr/local/ gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12/fsl-linaro-toolchain/bin:/home/xrz/pa100_toolchain/opt/freescale/ Ltib/usr/bin2. How to compile the kernel and configure the kernel Make Menuconfig arch=arm cross_compile=arm-fsl-linux-gnue

How GPIO is configured for Freescale IMX6 processors Turn from: Http://zzjlzx.blog.chinaunix.net/uid-9688646-id-5206540.html In Linux or Android, if we want to configure a Freescale IMX6 processor's Gpio pin, such as the gpio_19 pin, then this: [CPP] view plain copy #define Mx6q_pad_ Gpio_19__gpio_4_5 \ (_mx6q_pad_gpio_19__gpio_4_5 | Mux_pad_ctrl (No_pad_ctrl)) Where _mx6q_pad_gpio_19__gpio_4_5 is defined

/*************************************************************************** * imx6 ar8031 Gigabit NIC cannot be used * imx6 either run Li Nux or Android cannot ping a direct-attached PC, but DHCP is configured to surf the internet normally. * This document documents the resolution process. * * Tony Liu, 2016-4-19, Shenzhen*/One, Ping does not pass the following attempts:1first turn off the firewall on the

In Linux or android systems, if we want to configure the gpio pin of the feisikar imx6 processor, for example, the gpio_19 pin, we should look like this: #define MX6Q_PAD_GPIO_19__GPIO_4_5\(_MX6Q_PAD_GPIO_19__GPIO_4_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) _ Mx6q_pad_gpio_1920.gpio_4_5 is defined: #define _MX6Q_PAD_GPIO_19__GPIO_4_5\IOMUX_PAD(0x0624, 0x0254, 5, 0x0000, 0, 0) The iomux_pad macro is a key macro defining gpio. Its prototype is: #define IOMUX_PA

IMX6 Device Tree Interrupt description Turn from: Http://zzjlzx.blog.chinaunix.net/uid-9688646-id-5680717.html Kernel_imx/documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt594 egalax_ts@04 {595 compatible = "Eeti, egalax_ts"; --corresponds to the I²C device name in the driver.596 Reg = 597 interrupt-parent = 598 interrupts = 599 Wakeup-gpios = 600};601The second cell bits[3:0] is used to specify trigger type and level flags:1 = Low-

In the use of IMX6 Core Board development, the program written to a U disk, want to run the program on the board through a U disk, U disk inserted on the board after the minicom in the information display, but unable to find the Mount file,/dev and/mnt did not find the corresponding file. Baidu later found that the U disk in the arm of Linux needs to be manually mounted. Here's how:1, the USB stick will be inserted after the information displayed in t

1. Adopt slave mode2, SS_CTL configuration is 0The configuration instructions for this bit in imx6 are as follows:whichIn slave Mode-an SPI burst was completed when the number of bits received in the shift register isEqual to (BURST LENGTH + 1). Only the n least-significant bits (n = BURST length[4:0] + 1) of theFirst received word is valid. All bits subsequent through received word in Rxfifo is valid.Follow the following two sentences:If BPW is set t

In the process of using imx6q spi5 (spi5 I added), I encountered a problem: 1) The upper app sends 3 bytes of data to Spi5 via Write () , uses the oscilloscope to capture its chip selection signal, as shown in: 2) The same driver, the upper app sends 3 bytes of data to the SPI2 via write () and uses an oscilloscope to capture its chip-selection signal, and then the slice is pulled higher after each packet of data (3 bytes) is sent. 3) on the Freescale's official website https://community.fre

1. Description of the phenomenon1) using the IMX6 Development Board, load 9 feet of 8G SanDisk SD card, the SD card read and write files are normal2) after inserting the 9-foot SD card into the newly welded SD card holder, the read-only cannot be written.2, read-only reasonsThe w/p pin on the SD card holder is soldered (equivalent to being suspended). Problem solving after re-soldering w/p.3. Cause analysisNormally, if the lock on the SD card is not l

I. Overview 1. The display drive architecture of flisikar imx6: 2. Objectives: Because the sabrelite Development Board itself has provided LVDS interface, the target screen is LG's LP101WX1-SLN2, its main parameters are: Resolution: 1280*800 Color: 18 digits Color: 262 K Clock frequency: 69.3 M Hz 2. porting process 1. First, connect the screen interface to the LVDS interface of the sabrelite Development Board. The following LVDS interfaces are pr

Imx6q for C20 write Gpio driver, in the upper layer call open () function always error, return-1.After parsing the Gpio_request function, and looking for IMX_GPIO_NR (1, 17) in BOARD-MX6Q_SABRESD.CDefinition, found two definitions, (1, 17) and was used in Mx6_sabresd_board_init ()." Ft5x06-rst ")Since the PIN is a dedicated pin in the printed PCB board, the statement is commented out in the kernel, and the kernel is re-burned, then the test is OK.The experiment proves that the gpio_request can o

imx6 Device Tree Pinctrl parsing Transferred from: http://zzjlzx.blog.chinaunix.net/uid-9688646-id-5680705.html Recently in the porting of Linux, with the kernel version of 3.14.28, in the high version of the kernel source used in the device tree (device-tree), the device tree with the Pinctrl configuration, recorded. 1. General Settings When configuring the serial port, the configuration information for the Pinctrl is as follows: [CPP] view plain co

Operating system: Windows Server R2 (64-bit)C:\Windows\System32\WindowsPowerShell\v1.0\Modules under the Servermanager, but still can not find.To solve this problem, it takes 2 steps:1. Implementation strategy in PowerShell (execution policy)One reason is that the default execution policy for PowerShell is restricted, which means that you can run a single command, but you cannot run scripts, including format and configuration files (. ps1xml), module

The following content of this article will be updated here: "http-flv Live Module (nginx-http-flv-module) based on Nginx-rtmp-module module" continued. Note: Many of the configurations below are no longer available because the implementation is somewhat different from the earlier implementations. In order to see the hi

one, sys module1. Definition:A module that interacts with the Python interpreter2, sys module commonly used methods(1) sys.argv methodDefinition: Command line Arguments list, the first element is the path of the program itselfCases:Import Sysprint (SYS.ARGV) # SYS.ARGV just reflects the current module name, with a list of # and Pycharm software automatically adds

format, same as Time.strftime ()Stream: Specifies the output stream that will log, can specify output to Sys.stderr,sys.stdout or file, default output to Sys.stderr, stream is ignored when stream and filename are specified simultaneouslyLogging.getlogger ([name]): Create a Log object:Returns a logger instance that returns root logger if no name is specified. As long as name is the same, the returned logger instances are the same and only one, that is, the name and the logger instance are one by

the directory if it is empty, if the upper level is also empty, also delete, etc.# Os.removedirs (R ' a/b/c/d ')# Delete a file# Os.remove (R ' d ')# os.rename (' oldname ', ' newname ')# get file \ Directory information# Obj=os.stat (R '/users/zhangrenguo/pycharmprojects/passers-by dialogue/day18/os module. Py ')# print (obj)# The path delimiter for the current file# Print (OS.SEP)# line Delimiter# Print (OS.LINESEP)# Environment Delimiter# Print (O

Regular expressionsMeta-character quantifier (?)Metacharacters:.\w \d \s \w \d \s\ t \ \b() |[] [^]^ $Quantifiers:* + ?{n}, {n,}, {n,m}Re moduleHow to invoke the RE moduleFind: FindAll search match FinditerSplit and replace: Split Sub SubnCompile: Compile Save timeHow many places is the RE module used in?Quantifier: Indicates a match 0 or 1 timesAfter the quantifier: is the sign of the lazy matchGroup naming: (? pFindall/split Ungroup Priority: (?: Re