nfs mount options

Label:This problem is that the server does not allow the client to mount, then modify the service side of the permissions $ sudo vi Add text at the end # # NFS daemons portmap:all lockd: All mountd: All rquotad:all statd: All Configure Hosts.allow $ sudo vi/etc/hosts.allow Add text at the end # # NFS daemons 192.168. the . LOCKD: 192.168. the . 1

Visit a newly deployed web in the afternoon, open a merchant homepage, and the pictures will not display correctly. The server enters the related directory, prompting permission to reject. Because the pictures are all there is a dedicated server, the Web machine is through NFS access to picture resources. So the issue of NFS permissions should be caused. With regard to permissions issues, it is generally t

Use Uboot to start the kernel and mount the NFS root file system. After the kernel is compiled, copy the generated Kernel File uImage to/tftpboot/, download the kernel to the Development Board through the tftp server, and run the command: tftp 31000000 uImage. after the download is complete, configure the bootargs environment variable: setenv bootargs noinitrd console = ttySAC0, 115200 init =/init root =/d

NFS service ~~~ Failed to mount on client! -- Linux Enterprise Application-Linux server application information. For details, refer to the following section. Hello everyone, I want to ask you a question about the NFS server! Made on fedora My NFS was successfully tested last night. The customer can

A problem with an NFS mount error was encountered today with the following error message: Mount:wrong fs type, bad option, bad superblock on 125.64.41.244:/data/img,Missing codepage or helper program, or other error(for several filesystems (e.g. NFS, CIFS) you mightNeed a/sbin/mount.In some cases useful info are found in Syslog-tryDMESG | Tail or soAccording to

Environment Description:210.10.3.78 Meditation Liunx210.10.3.216 AIXPhenomenon:78 shared, this machine can mount, but 216 cannot mountThe operation process is as follows (root):/* Meditation LIUNX Operation */Shares:#/etc/rc.d/init.d/portmap start#/etc/rc.d/init.d/nfsserver start#vi/etc/exportsAdd to/home * (Rw,sync)Mount:Mount-t Nfs/home/mnt/testUnloading:Umount/mnt/test/* operation on AIX */

Mount iscsi, ntfs, and nfs in linuxGenerally, the local server has limited disk space and requires additional disk loading. You can mount the remote shared storage disk. Currently, three types of storage are used: iscsi, ntfs, and nfs.1. mount the iscsi type1. Find the disk

After configuring the kernel, copy the generated kernel file uimage to/tftpboot/, download the kernel to the board via the TFTP server, and use the command: TFTP 31000000 uimage. Configure the Bootargs environment variable after the download is complete: setenv Bootargs noinitrd console=ttysac0,115200 init=/init root=/dev/nfs rw nfsroot=192.168.1.118:/home/rootfs,proto=tcp, Nfsvers=3 Ip=192.168.1.119:192.168.1.118:192.168.1.1:255.255.255.0::eth0:offBe

When you mount the Iomega Storage shared NFS file directory with the Mount command, there is a possibility that the error message "Mount:wrong FS Type,bad Option,bad block on ..." appears.Solution: First, the connectivity of the network is confirmed; If the error is still, check the/sbin directory is not/sbin/mount.nfs files, installation

Win7 added a lot of useful features, but the default did not open it, today, briefly on the Next WIN7 NFS features, through this feature, you can let Win7 share Linux below the disk partition or directory data, this function can only be achieved through Samba or FTP, And configuration is complex, and now through the Win7 under the NFS function, only a minute to complete the configuration, simple and conveni

Nfs-config () {#服务端配置nfs, #先关闭防火墙或开放端口vi /etc/servicesmountd1011/tcp #rpc .mountd mountd1011/udp #rpc .mountdrquotad1012/tcp #rpc. Rquotadrquotad 1012/udp #rpc .rquotadvi/etc/sysconfig/iptables#portmap-ainput-p tcp--dport111-jaccept-ainput-pudp--dport111 -jACCEPT #nfsd -ainput-ptcp--dport2049-j accept-ainput-pudp--dport2049-jaccept# Mountd-ainput-ptcp--dport1011-jaccept-a INPUT-pudp--dport1011-jACCEPT #rquo

Device Connection: Crossover cable serial cable USB cable power line network settings: Notebook Ubuntu:wifi, set IPv4 set "local connection only", do not automatically, at this time WiFi is turned off ifconfig view PC Address inet/ip:169.254.9.78 Mask/mask;255.255.0.0 broadcast address: 169.254.255.255 Development Board Default: 192.168.1.230 set both in the same network segment: Modify the Board:/etc/ eth0-setting change its IP address to the ipip:169.254.9.100mask;255.255.0.0gateway:169.254.25

1, first determine the Bootargs parameters of the Uboot boot kernelLinux-commandline = Root=/dev/nfs Nfsroot=192.168.1.131:/home/tiny4412/rootfs_qtopia_qt4 ip= 192.168.1.230:192.168.1.131:192.168.1.1:255.255.255.0::eth0:off Rootfstype=nfs console=ttySAC0,115200 init=/ LINUXRC ctp=2 skipcali=y uhost=y2. Mount due to network configuration issues/sbin/ifconfig Lo 12

1, problem descriptionThe serial port outputs the following information without any response.Ip-config:complete: device=eth0, addr=192.168.1.88, mask=255.255.255.0, gw=192.168.1.1, host=192.168.1.88 , domain=, nis-domain= (none), bootserver=192.168.1.58, rootserver=192.168.1.58, rootpath=vfs:mounted root (NFS FileSystem) on device 0:12.freeing init memory:212kstarting pid 1434, tty ': '/etc/rc.d/rcs ' Mounting/proc and/sys Star Ting the Ho

When using NFSV4, do the following on the NFS server: 1234567 [[emailprotected]~]#vim/etc/sysconfig/nfs#Optionalargumentspassedtorpc.nfsd.Seerpc.nfsd(8)#Turnoffv2andv3protocolsupportRPCNFSDARGS="-N2-N3"----->启用#Turnoffv4protocolsupportRPCNFSDARGS="-N4"---->启用 Restart Service: 1 [[emailprotected]~]#servicenfsrestart NFS