A comprehensive introduction to the setting of the mercury Wireless Router

Regarding the setting of the mercury wireless router, we will start from the following aspects: Infrared connection, USB connection, and nic connection? The following example describes how to use the mercury wireless router settings.

Infrared online

Many laptops have infrared interfaces, which are suitable for use when laptops and laptops are connected Without network adapters or network cables. Generally, the infrared devices and ports in the notebook are opened by default. If your notebook supports a speed of 4 Mbps, you can press F2 or another key to enter the BIOS of the notebook, in the BIOS "UARTModeSelect Infrared Transmission Mode", select "ASKIR" to make your infrared reach a speed of 4 Mbps during transmission .), When you install an operating system for your laptop, you usually install the driver and the fast infrared protocol.

In this case, you only need to open the "infrared" icon in the "control panel" and select all the options in the "options. In actual connection, the infrared interfaces of the two laptops are aligned. When the system prompts that the two laptops have been connected, a sound prompt is displayed. In addition, in the taskbar in the lower-right corner of Windows, you can also see the icon that the connection has been established.) At this time, the system automatically runs the wireless connection program, you can select the file you want to swap for file transfer. It should be noted that, although the infrared line is convenient, it also has disadvantages such as low connection quality, near distance, and slow transmission speed. It is suitable for the exchange of some small files.

Mercury wireless router settings: USB connection

USB interfaces are currently the mainstream interfaces of computers, and almost all laptops have these interfaces. Therefore, using them for online connection is certainly very convenient. To connect two computers through a USB interface, first you need to buy a "USB connector" or a USB pair cable or a USB virtual network card cable in the computer store, there is a bulging package in the middle of the cable, which is obviously characteristic). The price is generally about 50-yuan based on the brand and quality.

Connect the cables to the USB ports of the two computers. Then, the system will prompt you to find the new hardware, but it cannot be properly recognized. Plug in the installation disc of the USB connector to the corresponding installation directory and file, the mouse is named pc-pc-linq.exe execute file, open and click "Next", after completion, a icon named "PC-LINQ" will be generated on the desktop, and then restart the computer. When you enter WINDOWS again, the system will automatically find the "USB connector" virtual NIC Driver and install it on your own.

The other computer also installs the software and driver in the same way. After everything is okay, You can execute the "PC-LINQ" file on both computers, and in the window that opens, you can drag or COPY any file on another computer. The advantage of USB connector is that the speed is much faster than that of serial port connection, and the stability is better than that of infrared connection. However, its weakness is that it cannot be used for Internet sharing.

Mercury wireless router settings: Nic networking

Network Adapter should be the best way to connect laptops, because it can not only achieve resource sharing through network connection, but also share the internet.

How to Create accessories and network cables

Most laptops have built-in NICs, but it doesn't matter if your laptop does not have a built-in Nic. You can choose a PCMCIA Nic. Tip: the PCMCIA Nic is a type of NIC used for laptops. The PCMCIA bus is divided into two categories: one is a 16-bit PCMCIA and the other is a 32-bit cartana. Cartana is a high-performance PC Card Bus Interface Standard for laptops. It not only provides a faster transmission rate, but also can exchange data directly with the computer memory independently of the master CPU, this reduces the CPU burden, so you can choose the preferred one. Then, it is recommended) You can create a "network card connected to the network card for dual-host couplet)" and a "network card connected to the Hub", the length is generally 3-5 meters. During production, it should be preferred a soft and easy-to-fold high quality twisted pair wire.

Mercury wireless router settings for Internet sharing

After the accessories are ready, first install the NIC driver, and then install the relevant network protocol according to the method described in "1. Local Network Basic settings, you can easily share resources between your laptop and other computers by inserting a network cable in the RJ45 network interface of your laptop. However, one of the biggest advantages of network interfaces over the previous several online methods is that they share the Internet. Next we will focus on how to configure PWIN98 for Internet sharing ).