Bitcomet acceleration Compaction Method-Let your bt fly!

2 m/256 (useful for zookeeper)

Network Connection: Maximum downlink speed: 1000
Maximum upstream speed: 15
Cold weather 100
(Then perform a more refined Tuning Based on your own dripped compaction)

Task setting: The maximum upstream speed of each task. The maximum speed is 10, and the minimum speed is 15 to 15 ~ 30
Renewal speed per service certificate: 5
Upload speed on the upper-right letter of Warranty: 5

External interface: displays a maximum of 1000 peer data records.
Input parameter settings: added tracker usage: 0

Network Connections: Maximum connections per worker: 1000,
Number of connections maintained for each worker: 1000,
Auto Scaling
Number of instances connected to the global warranty: 10,
Maximum size of the sent packets: automatic,
Transmission Interval: 100or150
Maximum number of TCP connections in the same time period: 1000,
Whether to allow Intranet Communication over UDP: [Intranet Communication/allow] [Internet communication/deny]

IP rules:
Allow the server to receive an internal IP address so that the sub-network can be connected: [Check the internal network]
The maximum number of incoming requests per IP address for the next task is 1000.
The maximum number of connections allowed per IP address for the preceding tasks is 5.

For 256 MB
Disk memory: the minimum value of disk memory is 6 and the maximum value is 30.

You can also perform better tuning based on your own pull-down.
Http://www.netfront.net/speedtest/testarea.htm

A perfect solution for slowing down BT download speeds Using XP firewalls

To speed up BT download, the key is to check whether the port for downloading is enabled and the Internet users (that is, users who can allocate valid IP addresses to your Internet) if no firewall is enabled,
Generally, the download speed of Bt can reach the download speed limit even if there is only one seed. If there is a firewall and the download speed of Bt is very slow, it means that the external listening port of Bt is not properly opened, think BT can
For high-speed download, you must set the parameters correctly to enable 6881 ~ Port 6889. The following describes how to enable the BT download port of the firewall.

1. Test port status

The default port used by Bt is the TCP connection of 6881,688 2... 6889 (only one port is used for each download, which is allocated in sequence ). We can test the port on the test page of the plug-in, enter 6881, and press "test" to check the status of the BT download port.

Three different results are returned Based on the port status. Port is blocked or firewall is enabled, as shown in 1; port is opened, port 6881 is enabled with medium BT, and Port 2 is opened, but port 6881 is not enabled with the use number BT, as shown in 3. The port used by Bt is 6881 ~ 6889. Test the ports one by one.

Figure 1

Port 6881 is not open

Figure 2

Port 6881 is open and in use

Figure 3

Port 6881 is open but not used

2. Open the download Port

Take the built-in ICF and other professional firewalls (Skynet firewalls) in Windows XP as an example to describe the BT download port of the open firewall.

1. Enable the BT download port in Windows XP ICF

ICF is "Internet connection
Firewall (Internet Connection Firewall. ICF is built between your computer and the Internet. It can let the data you request pass, and block the data packets that you do not request.
In the firewall of the package. When bt is used, it is sometimes blocked by ICF, causing the connection to the seed or data packet delay to reduce the download speed. Therefore, it is necessary to set the port used by Bt in ICF.
Block.

Right-click "Network neighbors" and choose "properties" from the shortcut menu. the "Network Connection" window is displayed. Right-click the connection you used to access the Internet, select "properties" in the pop-up menu.
In the "advanced" tab, click "Settings" at the bottom of the window to bring up the "Advanced Settings" window. This page contains some common network services. Now we want to add a new BT service.
Click the "add" button below to bring up the "service settings" window, as shown in figure 4.

Figure 4

In this window, you can enter the name of the computer that hosts the service on your network or
Fill in the IP address or machine name of your machine in the IP address column (for example, myserver is the local name), and enter 6881 in "external Port Number of this server, "External Server
Enter 6881 in the port number. Do not forget to select the TCP protocol, and then press "OK.

In this way, a "BT" service is added to the "service" column on the "Advanced Settings" page, as shown in Figure 5. This service is open to port 6881. You can also open port 6882 again ~ Port 6889 of the service.

Figure 5

Now our BT can be unobstructed in ICF.

2. Enable the BT download port in other professional firewalls

ICF is not enabled on many computers, but other professional firewalls are installed. The following uses the common Skynet Personal Firewall 2.5.0 as an example to describe how to enable the BT download port. For other firewalls, refer to the settings.

Click "custom IP rules" in Skynet. On the "custom IP rule" page, click "add rule". The "Modify IP rule" window is displayed.

In the "name" field, you can enter a simple description of the above name in the "Description" field. You can enter it by yourself. Select "receive or send" in the "data packet direction" column, and
Select "any address" from "Address", select the "TCP" page, and enter "from 6881 to 6889" in the "local port" column ", select the "syn" project in the "TCP flag" column, and
Select "pass" in the "when the above conditions are met" column. Other projects may not be changed, and click "OK. Now, a "sky" is added to the "custom IP rules" page.
BT rule, select it, and click the Save rule icon above. Everything is OK.

With the above settings, users on the public network can enjoy BT download at high speed.

Tips

Solve ISP issue BT 6881 ~ Method for port 6889

If the ISP has blocked the download port 6881 ~ 6889, we can break through the blocking by adding parameters to the commands that run when the torrent file is opened in the file type. The specific operation is (take Windows 2000 as an example ):

On the "Folder Options" Page, select "file type", find the torrent extension, click "advanced", select "open" in the displayed window, and click "edit ", in the editing window
The following line in the port is the command line parameter for starting Bt. After adding a space at the end of the line, add the following parameters to control port binding:-minport minimum port number-maxport maximum Port
. For example, it turns out to be "C: \ Program Files \ BitTorrent \ btdownloadgui.exe" on my machine ″
-- Responsefile "% 1". Change it to "C: \ Program ".
Files \ BitTorrent \ btdownloadgui.exe "-- responsefile" % 1 "-minport 8021
-Maxport 8029. Set the port number as needed, instead of the original 6881 ~ Within the 6889 range.

However, if our BT download software is bittor00005.x. XProgram. If you are using the original version or a modified version of 3.x. X, use the above method to modify the version.

Intranet ADSL port ing improves BT download speed

Preparations:
First, are you sure your ADSL is a public network or an Intranet?
To determine whether the Internet or Intranet is used:

Use ipconfig to query:
(1) Windows 9x/Me users
Select Start-> Program-> MS-DOS mode, open a doscommand line window, execute: ipconfig
(2) Windows NT/2000/XP users
Select "start"> "program"> "attachment"> "command prompt" with the mouse, open a DOS command line window, and execute: ipconfig
If your IP address is of the following three types, it is basically determined as Intranet:
10. x; 172. x; 192.168.x.x.
Users who use ADSL as the Intranet cannot achieve the purpose of ing through their own machine sub-settings, which is not discussed here.

Secondly, do I support and enable routing?
Most of ADSL now supports the routing function, which should be correct. Check whether your ADSL route is enabled. One thing to be clear is to enable the relationship between routing and port ing: Port ing is required only when routing is enabled.
Therefore, for Internet users of ADSL:
1. If the routing function is not enabled, no port ing is required. You only need to open the corresponding port of the firewall.
2. If you use the ADSL route to automatically dial or share the Internet, that is, to change to an intranet user, it is necessary to perform port ing. Continue.

Finally, obtain the default adsl ip address and user name and password.
Before performing port ing, read the instructions in detail, especially the NAT settings. This will save you a lot of detours, and it is likely that you have found a solution to the problem after reading the instructions. One thing to note is that many of the accompanying manuals roughly mention this information, and you need to go to the product's homepage to search for it.

Procedure:
Based on my ADSL settings and successful experiences of netizens. Specifically, ADSL is divided into two types: Virtual Server setting and only NAT (Port ing) setting.

Enter your default IP address (for example, 10.0.0.2 or 192.168.1.1) in IE and enter the web page settings of ADSL using the user name and password. Port ing starts.

If you are sending ADSL via China Telecom, you may not be able to find the virtual server or NAT (Port ing) settings on the web page.

We can also set it using telnet (remote connection ).
In "run", enter Telnet 192.168.1.1. In logon password: All the setting options after the password is entered are displayed.
This method applies to all dasl (excluding USB interfaces)

The following describes two methods for configuring ADSL routes, automatic dialing, and port ing with many wire applications:

"Zhongda ct500 route settings + automatic dialing + port ing 』
1. Open the computer and set the IP address to any address from 192.168.1.2 to 192.168.1.24 on the network adapter's TCP/IP,
Subnet Mask 255.255.255.0,
2. in IE browser, enter 192.168.1.1, the username is root, and the password is 12345 To Go To The setting interface of the chinamoocs cat.

3. Delete the original item in DHCP, that is, click the small circle in front, click the Del key on the leaf surface, and click Add to add a new one, you only need to fill in the initial CIDR Block
192.168.1.2 and the end CIDR Block 192.168.1.24. You do not need to modify the DNS. Remember not to modify the other values on the new page except the two values mentioned above! Remember!

4. In the ADSL configuration area, delete all the following eight virtual channels. After the light is deleted, write a VPI with 8 and VCI with 35, (ask the local ISP if there are differences across regions)

Pppoe: Enter the user name and password used for dialing.

Select auto dial, and click Add to set the new virtual channel.

5. Click napt on the left to perform port ing,
Add 6881 to public port,
Enter your lan ip address,
Set private port to 6881,
TCP protocol,
In this way, 6881 is added, and then 6882-6889 is added in the same way. You can determine the number of ports to add ing based on your needs. (Generally, ten items are enough)

6. After the preceding settings are completed in order, click the first save setting (the first one) in the left-hand save, and then click write to the cat and restart.

"Putian ADSL 02 route settings + automatic dialing + port ing 』

Open the computer and set the IP address to any address from 192.168.1.2 to 192.168.1.24 on the network adapter's TCP/IP,
Subnet Mask 255.255.255.0
Open IE and enter 192.168.1.1
Username admin password dare
Click Wan
Delete all virtual circuits first

Enable Yes
Vpi vci (usually 0-35 or 1-40 for local telecom)
Static IP address default
Mask default
Gateway default

Encapsulation Protocol pppoe LLC
Bridge disabled
Enter the username, password, and no data before the disconnection 10000
Review auto reconnect √ DHCP client enabled √

Click "Submit" and then "Save settings" to make the settings take effect.

Port ing
1: Enter Telnet 192.168.1.1 in "run"
2: Enter "dare" in logon Password"
3: Select 4 network setup in the menu. Select 7 NAT (p) T configuration and select napt.
4: Select 8: Advanced setup from the menu.
5: Select 4: Virtual Server
6: select 1: Add a setting
7: Enter 1 in Enter ID (the serial number is 1---11)
8: enter public port: Enter 6881 (BT port number)
9 enter public port 6881 (BT port number
10: enter port type: Input 1 (TCP) Select the protocol as needed
11: Enter IP Address: Enter 192.168.1.x (your lan ip address)
Now the ing of 6881 is completed.
Select 3. Display ssttings you can see that the ing port you just added is repeated in Steps 5: 1 -- 10. You can add new ports (11 in total) press the "S" key in the back menu until the ADSL service starts again (the power is unavailable for about 20 seconds; otherwise, the ADSL service will be damaged)

++ IP address filtering file

Http://files.cnblogs.com/geoff/ip.rar