Cisco device VTY Certification

VTY authentication is telnet AUTHENTICATION. telnet AUTHENTICATION can also be divided into: 1. Password Authentication 2. User Name + Password Authentication

Topology:

650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131227/04343Q391-0.png "title =" Capture. PNG "alt =" 103724280.png"/>

Set VM1 Nic IP address to 192.168.2.2

650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131227/04343R533-1.png "title =" Capture 1.PNG" alt = "103850902.png"/>

1. Password Authentication:

Enable password ccna configuration to enter privileged mode the password is ccna and password authentication to enter mode to level 1)

Line vty 0 4

Password When the cisco password is ciscotelnet)

Login logon Verification

Effect

650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131227/04343W308-2.png "title =" Capture 3.PNG" alt = "2017604943.png"/>

2. User Name + Password Authentication:

Username cisco password cisco creates a user name and password

Enable password ccna creates a password in privileged mode. By default, the user name of cisco has the permission of level 1)

Line v 0 4

Login local login verification calls the local user name and password

Effect

650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131227/04343Q2A-3.png "title =" 4.PNG" alt = "104950779.png"/>

Finished

This article is from the "Cisco, zhanbo, Huawei" blog, please be sure to keep this source http://rujinfeng.blog.51cto.com/2712746/1298931