Connect H608B to the vro, including bridging

H608B re-connects the router, including bridging. There are generally two kinds of Connection Methods: 1. Connect the LAN port of the wireless router from the upper-level router, and only use the switch and AP functions.

You only need to change the LAN port address of the router to be different from that of the upper-level router. disable DHCP and enable the wireless function.

The method for accessing the Internet is the same as that for direct connection to a cat. 2. Connect the WAN port of the wireless router from the upper-level router. This is a second-level route.

You need to set up the WAN port according to the internet access method when connecting to the route cat. The LAN port address must be different from the upper-level route segment, and DHCP can be used. Because the H608B routing function is very junk, the speed of access to multiple computers will be slow. We recommend that you disable the H608 routing function and switch to a bridge connection. The specific method is to delete all wan port connections under H608B and create a bridge. After the INTERNET function is enabled, the following router PPPOE can be connected to the INTERNET.