Diagram of port ing in the MR804 Module

The diagram illustrates the port ing problem of the mercury MR804, which involves many things. There are also a variety of technical methods for port mring at the MR804 of mercury, so there will be a bit of confusion in the selection of methods. The following shows you a way.

TCP/UDP port mring of mercury MR804, 100 is my local IP address, and the local machine has been changed to this fixed IP address, DMZ host is also the local machine, UPNP is enabled normally, thunder prompts Intranet, the BC prompts the Internet, the donkey is HIGHID, and the BC prompts during the download of BT in all statistics, NAT port ing: Failed [Windows version Not Supported!]

 

Mercury MR804 port ing

It is a NAT port ing, not a router port ing. The figure and the highhighhighid indicate that the routing port ing is successful. I don't know how to add it. As mentioned on the first floor, the router port ing is the NAT port ing. Why does the NAT port ing still fail under the Global statistics of BC for HIGHID and BC Internet? Of course, the access to BC is UDP17569. If the port ing of the MR804 port is incorrect, how can I prompt you to connect to the Internet .... the answer is truly broken... forgot to say... my three machines share China Netcom's 2 m ADSL .. you cannot directly dial...

If there is a problem, it is estimated that it is Kaspersky. First, I set all the ports and the download server client as exceptions in the system firewall, and then disable the firewall. I use Kaspersky 2009 full-featured security software, in the firewall's packet rules, except for the first 16 default items passed, no other packet rules were added. I just asked how to add Port Exceptions to the firewall of Kaspersky 2009 full-featured security software? It is probably Kabbah.

By the way, when I mention the firewall, I have never heard of COFSSPEED, a German network accelerator. After I installed this software, it also showed that some packets were intercepted and cannot be pinged by XXXXX, it seems to be a firewall problem. Hello, the router port ing is the NAT mercury MR804 port ing, but the home router is not that professional. Therefore, it is called the port ing of the mercury MR804. If you are prompted that the NAT ing fails, the possible cause is: the port ing is incorrect. Which port does BC access your IP address? Is it 17559?

Note that the port you access is different from the port on which it accesses your port) and whether the protocol is tcp or UDP. If you try to disable DMZ, it may conflict. Check whether the firewall has blocked some ports. If none of them work, directly dial through the computer instead of the vro. This completely exposes the network and does not require ing. If the problem persists, add the problem. Thank you for your consideration. Check the UPNP and firewall settings of the operating system and software. Some firewalls have intercepted all UDP packets by default. In addition, you can use dial-up to check whether the router is faulty or the computer is faulty. One by one.

I have never heard of port ing of mercury MR804. I have not studied so many software. You can try to disable it. Or add a policy. In addition, you can use dial-up to check whether the router is faulty or the computer is faulty. If it works properly, it indicates that the router is faulty. If it is still abnormal, the computer may be faulty .. It seems that the operating system needs to enable UPNP.