Diskgenius non-destructive partition sizing tutorial

1, select the I partition, click the right mouse button, select the "Resize Partition" menu item, the following figure:

2, in the pop-up "Adjust Partition Capacity" dialog box, set the various partition sizing options, as shown in the following figure:

A. Space at the front of the partition, fill in 5GB, and then press ENTER or switch the input to another edit box, at which point the Diskgenius appears as follows:

B. Obviously, in general, we will not let disk space idle, click the Back Drop-down box, select "Merge to J:" As shown in the following image;

C. In the same way, adjust the space at the back of the partition, resize to 2GB, adjust the option to "merge to K:", as shown in the following figure:

3, click the "Start" button, Diskgenius will first display a prompt window, showing the operation of this lossless zoning adjustment and some considerations, as shown in the following figure:

4, click the "Yes" button, Diskgenius began to perform the partition lossless adjustment operation, the adjustment process, will display the information of the current operation in detail, the following figure:

5, after the adjustment of the partition, click the "Finish" button, turn off the adjustment of the Partition Capacity dialog box, the following figure:

As you can see, the disk partition capacity has been adjusted successfully!

When using Diskgenius for lossless zoning adjustments, there are a few things to note:

1, lossless zoning adjustment operations, if it involves system partitions (usually C:), Diskgenius will automatically restart the computer into the DOS mode, and automatically run the Diskgenius DOS version to complete the lossless partition adjustment work, after the partition adjustment, will automatically restart the computer, return to Windows system;

2, adjust the size of the partition, Diskgenius support mouse operation, you can use the mouse to change the size of the partition, move the partition location, switch the adjustment of space processing options, etc. can also directly specify the size of the adjusted partition, for users with special requirements, you can also set the exact starting and ending sector area code, the following figure:

3. During the lossless partition adjustment process, do not use other software to read and write the disk. In fact, Diskgenius is automatically locked in a partition that is currently being resized during a lossless partition adjustment process.

4, when the partition is relatively large, the data on the partition for a long time, the lossless partition adjustment process may be slightly longer, at this point, you can specify the adjusted operation, and then leave the computer, first to deal with other things, as shown in the following figure:

5, when the hard disk or partition of some kind of error, such as disk bad or other potential logic errors, or due to system anomalies, sudden power outages, and other reasons caused by the adjustment process interruption, will cause the partition resizing failed, resulting in the adjustment of the partition all the files are lost. Therefore, lossless partition adjustment is a risky operation. Therefore, when there are important files in the partition, please be sure to do the backup work, and then do a lossless partition adjustment operation!

Diskgenius also prompts you to do this when you start a partition tuning operation, as shown in the following figure: