ENSP practice telnet

Figure:

AR3260 (G/0/0) ------- AR3260 (G/0/0)

Example:

[Huawei] sysname w1

[W1] int g0/0/0
[W1-GigabitEthernet0/0/0] ip add 192.168.1.1 255.255.255.0
[W1-GigabitEthernet0/
Aug 02/0] 4 2013 14:16:46-05:13 w1 % 01 IFNET/4/LINK_STATE (l) [1]: The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state.
[W1-GigabitEthernet0/0/0] q
[W1] aaa
[W1-aaa] local-user huawei password cipher hello
Info: Add a new user.
[W1-aaa] local-user huawei service-type telnet
[W1-aaa] local-user huawei privilege level 3
[W1-aaa] q
[W1] user
[W1] user-I
[W1] user-interface vty 0 4
[W1-ui-vty0-4] au
[W1-ui-vty0-4] authentication-mode aaa

[W1-ui-vty0-4] q

Second Router

<Huawei> telnet 192.168.1.1
Press CTRL _] to quit telnet mode
Trying 192.168.1.1...
Connected to 192.168.1.1...

Login authentication

Username: huawei
Password: hello
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type: Telnet
IP-Address: 192.168.1.2
Time: 14:20:59-
-----------------------------------------------------------------------------
<W1>

 

This article is from the "ktcatv" blog and will not be reproduced!