Four aspects of ADSL acceleration settings

The ADSL acceleration settings should be considered in many aspects. We should pay attention to many issues from the details. Here we will discuss this topic. The article summarizes some methods for accelerating ADSL. Broadband dial-up Internet access has become as common as usual. Originally, the speed of dial-up Internet access is expected to be faster than that of dial-up by ordinary phone, but in fact, we sometimes feel that the speed of broadband dial-up Internet access is not significantly improved, or even slower than the speed of dial-up by ordinary phone. Why? In fact, there are many factors that affect the speed of broadband dial-up access. We must eliminate various possible factors one by one to restore the normal speed of broadband dial-up access.

ADSL acceleration configuration 1: Focus on heat dissipation to improve ADSL Performance

Once the ADSL Broadband "cat" has been working for a long period of time, it will generate a lot of internal heat, if these heat is not distributed in time, then, the electronic components inside the ADSL Broadband "cat" will be in a high temperature working state, in which case their transmission performance and stable performance will be greatly reduced, in this way, the Internet access speed is slow.

Many users do not pay attention to the details of the Heat Dissipation During broadband dial-up access, and often place the ADSL Broadband "cat" in a corner surrounded by non-ventilated corners, it also overlaps with devices such as hubs and routers. In this way, the heat generated when multiple devices work at the same time is more detrimental to the stable performance of ADSL; it is often a period of time before the Internet access, the speed is very fast, but it may not take long, the network transmission speed is only several KB per second, at this time, when we touch the ADSL Broadband "cat" with our hands, most of us will feel that it is very hot. When we turn it off for a while and then access the Internet, the speed will immediately rise again.

Therefore, in order to ensure the speed of broadband dial-up access, a very important link is to do a good job of heat dissipation and ventilation of ADSL Broadband "cat, it is best to place it in a well-ventilated environment, which can be in a constant temperature working environment if conditions permit.

ADSL acceleration configuration 2: Focus on the Protocol to ensure that the Network Card is single-minded

Many users often bind too many Internet protocols to the network card to give full play to the role of the network card, so that the network card can take more responsibilities, if too many communication protocols are bound to the network card, it usually takes more time for the network card to select the appropriate communication protocol to transmit the target data once the network card receives the transmitted data, in this way, we will obviously feel the speed of surfing the internet is slow.

In fact, many users' network cards are usually used to connect to the LAN and the Internet at the same time. In this way, the network card is subject to more than two types of protocols, therefore, it takes at least twice as much time for the network card to select the communication protocol for each data transmission. In the end, we feel that the speed of the Internet access is naturally a bit abnormal.

To increase the speed of dial-up Internet access as much as possible, we can install one network card for different connections based on different network connection purposes, and bind only one required communication protocol for each network card, ensure that the network adapter can work with one mind, so as to avoid selecting the communication protocol link, so as to effectively improve the speed of the Internet.

In general, we only need to bind a PPPOE protocol to the NIC directly connected to the ADSL Broadband "cat" device. It is another Nic connected to the LAN switch or hub, generally, you only need to bind a TCP/IP protocol to ensure that each network card is responsible for and collaborative. focus on lines to improve Internet Transmission Performance

Broadband dialing uses telephone lines to transmit data. If the transmission quality of the line is not high, the speed of dial-up access will naturally be affected. because the current ADSL dial-up technology often has the automatic network rate adjustment function, once the dial-up line is subject to unexpected interference, the dial-up technology can dynamically adjust the transmission speed of the internet according to the interference program of the line quality.

In order to avoid the impact on the Internet transmission performance due to line quality, we should strictly abide by the line construction standards when arranging telephone lines, and do not split the lines into forks at will, plastic casings need to be added to some key parts of the line to protect the line from wear and tear. Especially at the junction of the line, the connection is reliable and stable, protect the line joints against oxidation or erosion with protective housing.

ADSL acceleration configuration 3: Focus on the interface to avoid connecting more detours

The "interface" mentioned here actually refers to the connection exit used for Internet communication. by default, Internet Explorer usually uses normal dial-up connections as the egress for Internet connection. Our common broadband virtual dial-up software Enterhet300 is not a general dial-up, but a LAN dial-up; focus on the interface to avoid connecting more detours

The "interface" mentioned here actually refers to the connection exit used for Internet communication. by default, Internet Explorer usually uses normal dial-up connections as the egress for Internet connection. Our common broadband virtual dial-up software Enterhet300 is not a general dial-up, but a LAN dial-up;

In this case, when we successfully dial and use IE to browse information, IE will often first look for common dial connection interfaces. Once the interface cannot be found, IE will automatically search for whether there is a LAN proxy server, then, the interface of the broadband dial-up connection will be searched. Obviously, the speed of dial-up access will naturally be slow. in order to avoid detours in the selection of connection interfaces, we may re-open the Internet Connection Wizard and choose "connect to the network through broadband" in the Wizard interface that appears ", you can cancel the selection of the automatic search proxy server. The procedure is as follows:

First, run the IE browser program, and click "Tools"/"Internet Options" in the menu bar of the browser window. In the options setting window that appears, click the "connection" tab, click "add" on the corresponding tab page, and enter the Internet Connection Wizard window. In this window, select the "connect to network through broadband" project, then follow the wizard prompts to set the parameters for dial-up Internet access.

Next, on the "Connect" tab, click "LAN Settings", and in the settings window that appears, deselect all the selected statuses of "Automatic Detection Settings", "use automatic configuration script", and "use proxy server for LAN, click OK.

It is worth reminding you that if we use other Internet browsing software, we also need to adjust the original default dial-up connection method to connect to the Internet through the LAN, I believe this will significantly improve the Internet access speed!

ADSL acceleration configuration 4: Focus on installation and try to reduce interference in details

The "installation" mentioned here mainly includes the installation of NIC devices and the installation of dial-up software, because if these software and hardware are not properly installed, do not say it will affect the speed of dial-up Internet access. In severe cases, you cannot even connect to the Internet. in terms of NIC installation, we try our best to choose Nic devices with good brands and hard quality. During the installation process, we must ensure reliable contact between the NIC's golden finger and the motherboard slot, and fix the NIC with screws, to prevent the network card from slipping out of the slot after it is frequently plugged in or out by the network cable. If we use a poor network card at will, the network card's working stability will not be guaranteed, poor network cards are vulnerable to decommission due to the impact of large data volumes.

When installing the NIC driver, it is best to use the "Install from disk" method to install the driver with the original Nic configuration. This will often ensure that the NIC is in the most stable working state. when using dial-up software, it is mainly because it cannot be disabled illegally.