H3C RG210 Home Router installation illustration

H3C RG210 vro is easy to install. The installation steps are as follows:
1. If the network connection uses Ethernet broadband access, use the network cable to directly connect the WAN port of RG210 to the ISP. The H3C RG210 router is generally connected to the ISP network, instead of directly connecting to the Internet.

Ii. PPPoE settings (1) Enter 192.168.1.1 in the address bar of the browser and press enter to go to the WEB Management page. Enter the Administrator account password. The default Administrator account is admin and the password is admin. Www.2cto.com

(2) enter your Internet user name in the PPPoE user name and your internet password in the PPPoE password. (3) MTU refers to the largest data unit. Value Range: 576 ~ 1492, in bytes. The default value is 1492. We recommend that you keep the default value. (4) In the idle hanging up time drop-down list box, select the idle automatic hanging up time. If the device in the LAN has not accessed the Internet for a specified period of time, the device is automatically disconnected. When there is a request to access the Internet in the LAN, the device will automatically perform a dial-up connection. The default value is 0, indicating that it is always online. (5) enter the IP address of the Primary Domain Name Server in the primary DNS server; (6) enter the IP address of the secondary Domain Name Server in the secondary DNS server; (7) enter the IP address of the secondary Domain Name Server in the host (AC-Name) enter the Name provided by the ISP for authentication; (8) enter the Name of the PPPoE server provided by the ISP in the server Name (Service-Name.

3. WAN port settings click WAN settings in the navigation bar to enter the WAN port settings page, and then enter the network settings page. On the current page, according to the information provided by the ISP, in the connection type drop-down list box, select the Management port to obtain the IP address and set the corresponding parameters. You can obtain the IP address by connecting the WAN port to the network provided by the ISP. There are three optional methods: static IP, DHCP, and PPPoE. The default method is PPPoE. Iv. Bridging configuration bridging refers to enabling the LAN port to implement bridging through VLAN technology. Click Bridge settings in the left-side navigation bar to go To the VLAN page. The Mode drop-down list box is used to select the mode in which the LAN port is connected to the WAN port. There are two modes: bridge to WAN and route mode.

(1) The vlan id text box is used to set the port in the corresponding VLAN. The port of www.2cto.com in the same VLAN has the same vlan id. The vlan id of the LAN port is set based on the provided services. (2) The Tag drop-down list box is used to select whether to Tag the sent packets. Tags the packets sent in the VLAN corresponding to each vlan id to differentiate different services. Tagged tags the untagged outbound port packets, tags with different VLAN IDs are not processed. Untagged removes tags from outgoing port packets with the same vlan id. Untagged does not process packets with different VLAN IDs. (3) Enable IGMP Snooping. Based on the requests from multicast clients in the LAN, the device distinguishes the multicast services that multicast clients are added to and forwards multicast data on the Internet to the corresponding clients. This function is disabled due to lack of time. The simple installation method of H3C RG210 vro has been completed, and you must know how to set it. This article is from