How does Samsung Galaxy Note3 flash? Note3 flash brush tutorial

1) before flashing the machine, we extract the SD card from the computer and put it into the mobile phone. Then, we shut down the mobile phone, after the instance is shut down, press "power key + volume + Home" as shown in the following figure to go to the recovery interface.

2) on the mobile phone, go to the Recovery interface. We select "clear data" and "clear Cache" by using the audio up and down keys, and then press the power button to confirm (sort the Cache one by one)

3) after clearing the data, we need to select "install ZIP Image" in the SD card"

4) If you put the ZIP card swipe package into an external SD card, select the "/external_sd" option.

5) then we can find the prepared brush sample package on the SD card, so that the flash process will take several minutes. At this time, we just need to wait.

6) wait until the phone prompts that the flash is successful. Restart the phone and you will find that the flash is successful.

If the flash fails, refer to the following methods to solve the problem:

Preparations:

1) first download a flashing Genie to your computer.

2) you can download the refresh history from other websites.

How to save bricks for Samsung Note3:

1) after you press the phone for 10 seconds, the device will be forced to shut down.

2) simultaneously press and hold the volume reduction and power key to enter fastboot. At this time, the mobile phone screen shows a green robot.

3) enable the flashing Wizard and the system will automatically install the driver.

4) decompress the firmware package and run "flash-all. Bat.

5) after the flash is complete, restart the device and wait patiently. Then, import the backup data to use the mobile phone.