How to set the built-in dial-up routing mode of kemaiyi ADSL

Cisco and Huawei Technology Network http://www.vlan9.com

1. Set the NIC address to 192.168.1.2, subnet mask: 255.255.255.0, Gateway: 192.168.1.1, and Master DNS: 202.99.96.68.

2. Enter 192.168.1.1 on the settings page. Username: root and password: root.

3. view "Homepage" -- "System View" -- "WAN interface" to find the "interface" (eoa-X) for the VPI/VCI (that is, or) value of the Region) and "lower layer interface" (aal5-X) Note: X is any number )!

This step can also be understood as finding out the eoa and aal5-values corresponding to or of your region!

4. Click "bridge" -- Delete "eoa-X" (X indicates the value you just noted down)

5. Click "bridge" -- "EOA configuration" -- delete the corresponding "aal5-X" (X is the value you just noted down)

6. click "Wide Area Network" -- "PPP configuration" -- "add" -- "ATMVCC" to select "aal5-X" (X is the value you just noted down), others remain unchanged by default, enter your phone number and password in the user name and password (your phone number by default ).

7. Click "manage" -- "Submit/restart" -- "Submit" -- "restart "! (This step only saves settings. In fact, you can access the Internet after completing step 1)

Summary: This method is used when the nic ip address, subnet mask, gateway, and DNS are specified. If you want to use the IP address automatically, You need to activate the DHCP function of the device, the method is not described here!

(T113)