How to Set up a wireless router

It is very important to set up a wireless router. First, let everyone know about the configuration of the next-level wireless router, and then introduce the multi-level wireless router settings: wireless Internet access through the LAN ). Now, more and more users share Internet access and use their own wireless routes to access the Internet. Wireless routes are cheaper, and wireless and wired routes can be used at the same time, here we will talk about the settings for using TP-Link Wireless routing, generally, the network environment configured by the wireless router is directly connected to the Ethernet broadband and the LAN is set through other wireless routers or the server is connected to the Ethernet broadband.

1. Single-Stage wireless router settings: (access Ethernet bandwidth directly through this router)

This method is very simple. You only need to read the manual and know how your broadband can be accessed. There are generally three types: Virtual dialing, automatic IP allocation, and fixed IP (static ), then, follow the instructions in the instruction documents to go through the following steps:

1. Connect the LAN port of the route to the computer Nic, and set the IP address on the NIC to the same network segment as the route;

2. Open the browser, enter the IP address of the router, for example, 192.168.1.1, in the address bar, and open the settings page (enter the default password, for example, admin and admin );

3. Set network parameters: (using virtual dialing as an example );

① Internet access: ADSL virtual dialing (PPPoE );

② Fill in the information box: ADS account;

Password: the login password provided by the carrier;

③ Wireless parameter settings: you can set a password or switch;

④ The gateway of the lower-level wired online computer Nic is set as the IP address of the router (Note: it is not the IP address of the WAN port !) For example, 192.168.1.1;

DNS: the DNS address of the Telecom server.

⑤ All LAN ports and wireless networks can be used for Internet access.

If you use the other two methods to access the Internet, you must set the WAN port information.

Ii. Multi-level wireless router settings: connect to the Internet via a LAN)

Go to the wireless router settings page, as shown in the preceding figure;

Set network parameters:

① Internet access: Ethernet broadband fixed IP (static ). If you use a server, you can select whether to automatically allocate IP addresses based on the server settings;

② Fill in the information box: IP Address: can be selected at will. (If the server is used and the server has allocation rules, follow the rules.) For example: 192.168.1.2;

Sub-mask: 255.255.255.0;

Gateway: the IP address (internal server card IP address) set by the upper-level wireless router, for example, 192.168.1.254;

DNS server: the DNS address of the Telecom server, for example, 202.102.197.122 (different telecommunications data centers );

③ The Gateway of the lower-level computer Nic is set as the IP address of the wireless router (Note: it is not the IP address of the WAN port !) For example: 192.168.1.1; DNS: the DNS address of the Telecom server;

④ Set wireless parameters;

⑤ All LAN ports and wireless networks can be used for Internet access.