Install windows Host on virtual machines

Install windows ghost1 on a virtual machine. you must activate the primary partition before partitioning the hard disk. Otherwise, FATAL: INT18: boot failure to activate the primary partition through PQ: Go to PQ-> right-click the primary partition (drive C)-> advanced-> set to function and then execute the corresponding action. You can use the PPTD partition table to activate the primary partition by selecting the primary partition to set it to active (generally, if the current hard disk does not have active primary partition when PPTD is started, it will prompt, as prompted, click "yes ). Activation using other partitioning tools is similar. Generally, the status of the primary partition is set to "active" or "active. 2. After the partition is complete, if the normal step fails to be installed, go to the PE system, then run autorun.exe in the image package, and then choose to install the image or restore it with the image restoration tool. (In short, the system can be installed only by restoring the ghost. Otherwise, the system cannot be installed ).