Introduction to how to set up a lingke Router

The topic of this article is about how to set up a vro in lingke. Let's make a summary so that you can be aware of it when setting up a vro. I. Preparations 1. Learn about some parameters of your own bandwidth: (1) PPPOE: Know your user name and password. (2) static IP Address: Learn about static IP addresses, subnet masks, gateways, DNS servers, and backup DNS servers. (3) Dynamic IP Address: You can obtain the IP address from the local server. You can find out about the DNS server and use it as an alternative. 2. Connect the vro to the computer physically and turn on the power.
2. Setting Method www.2cto.com 1. Nic setting: If the DHCP function is enabled on the vrodhcp, the NIC is set to automatically get the IP address. If not, the NIC needs to set the IP address in the same CIDR block as the vro, set the gateway as the IP address of the vro and enter the DNS server parameters. 2. vro settings: Enter the vro settings page. Follow the prompts in the installation wizard and enter the corresponding parameters to complete the settings. 3. After configuring the router and computer, you can directly access the internet. 3. Specific Application 1. On-Demand connection: PPPOE mode of WAN port status, with four options for on-demand connection. (1) On-Demand connection: automatically connected when data is accessed. (2) Automatic Connection: automatic connection is performed after the instance is started and disconnected. (3) timed connection: automatically connects within the specified time. (4) manual connection: manual connection is performed by the user.
2. Virtual Server: defines the ing relationship between the WAN service port and the LAN server. The setting method is forwarding rule-virtual server, and fill in the corresponding server port and Server IP address. 3. Domain Name Filtering: controls access to certain websites on the LAN. setting methods: Security Settings-Domain Name filtering, and entering the effective time and domain name. Www.2cto.com 4. MAC Filtering: controls the access permissions of computers in the LAN by filtering MAC addresses. The setting method is Security Settings-MAC address filtering, and the MAC address to be filtered. 5. data packet filtering: you can filter data packets to control the access permissions of computers on the LAN. Set this parameter to "Security Settings"> "firewall settings"> "enter the information you want to control the computer, and set the effective time, lan ip address, port, Wan IP address, port, protocol, etc. 6. DMZ settings: the DMZ host makes a specific computer open to the Internet. Some applications need to activate multiple TCP/IP interfaces, and DMZ can implement these functions for the computer, setting Method: Forwarding rule-DMZ host, fill in the corresponding computer ip address. 7. Time Setting: restrict the time range for accessing the Internet. Set the time range as follows: security setting-firewall setting wizard, and enter the time range for disabling Internet access, in this case, machines on the LAN can be controlled and cannot access the Internet during this period.