This example is created based on ASMLib or A bare device. 1. Install the support package required by asm. A. Download the support package from the oracle website. Here, B. Download the corresponding package based on the Linux kernel.
This example is created based on ASMLib or A bare device. 1. Install the support package required by asm. A. Download the support package from the oracle website. Here, B. Download the corresponding package based on the Linux kernel.
This example is created based on ASMLib or a bare device.
1. Install the support packages required by asm
A. Download the support package from the Oracle Website: here
B. Download the corresponding asm installation package based on the Linux kernel:
Oracleasm-2.6.18-8.el5-2.0.4-1.el5.i686.rpm
Oracleasm-2.6.18-8.el5PAE-2.0.4-1.el5.i686.rpm
Oracleasm-2.6.18-8.el5xen-2.0.4-1.el5.i686.rpm
Oracleasmlib-2.0.3-1.el5.i386.rpm
Oracleasm-support-2.0.4-1.el5.i386.rpm
C. Install rpm-Uvh ...... -- nodeps
1.1 Install ASMLib
# Cd/orahome/wangnc/asmlib
# Rpm-Uvh oracleasm-support-2.1.3-1.el4.i386.rpm oracleasm-2.6.9-55.ELsmp-2.0.3-1.i686.rpm oracleasmlib-2.0.4-1.el4.i386.rpm
1.2 Configure ASMLib
#/Etc/init. d/oracleasm configure
...
Default user to own the driver interface []: oracle
Default group to own the driver interface []: dba
Start Oracle ASM library driver on boot (y/n) [n]: y
Scan for Oracle ASM disks on boot (y/n) [y]: y
...
# Df-ha | grep oracleasm
Oracleasmfs 0 0 0-/dev/oracleasm
The following describes how to enable or disable the Automatic startup of oracleasm:
#/Etc/init. d/oracleasmDisable
#/Etc/init. d/oracleasmEnable
1.3 Physical disk partition
# Fdisk-l | grep Disk
Disk/dev/sda: 250.0 GB, 250059350016 bytes
Disk/dev/sdb: 250.0 GB, 250059350016 bytes
Command (m for help ):N
P
Partition number (1-4 ):1
# Fdisk-l/dev/sdb
Disk/dev/sdb: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065*512 = 8225280 bytes
Device Boot Start End Blocks Id System
/Dev/sdb1 1 30401 244196001 83 Linux
1.4 Create an ASM Disk
These disks are empty disks that do not contain any content. during creation, the physical disk must contain a partition number, such as sdb1.
The ASM disk name can be uppercase letters, numbers, and underscores (_) and start with a letter:
#/Etc/init. d/oracleasm createdisk VOL1/dev/sdb1
Marking disk "VOL1" as an ASM disk: [OK]
If Failed is prompted, you can track the log:
# Tail-f/var/log/oracleasm
Attached disk deletion statement:
#/Etc/init. d/oracleasm deletedisk VOL1
Check Configuration:
#/Etc/init. d/oracleasm querydisk VOL1
#/Etc/init. d/oracleasm querydisk/dev/sdb1
#/Etc/init. d/oracleasm listdisks
# Ls-l/dev/oracleasm/disks /*
#/Etc/init. d/oracleasm status
1.5 Create initialization parameter file
Note that asm_diskstring must start with 'orcl.
# Su-oracle
$ Export ORACLE_SID = + ASM
Asm_diskstring = 'orcl: VOL *'
Background_dump_dest = '/u01/app/oracle/admin/+ ASM/bdump'
Core_dump_dest = '/u01/app/oracle/admin/+ ASM/cdump'
User_dump_dest = '/u01/app/oracle/admin/+ ASM/udump'
Instance_type = 'asm'
Large_pool_size = 12 M
Remote_login_passwordfile = 'shared'
,