MEGACLI basic information for capturing raid

command to use:
Megacli-ldinfo-lall-aall RAID Level Check
Megacli-adpallinfo-aall Check RAID card information
Megacli-pdlist-aall Viewing hard disk information
Megacli-adpbbucmd-aall View battery Information
Megacli-fwtermlog-dsply-aall View RAID Card logs

MEGACLI Common Parameters Introduction
Megacli-adpcount "Display adapter Count"
Megacli-adpgettime–aall "Show Adapter Time"
Megacli-adpallinfo-aall "Show All Adapter Information"
Megacli-ldinfo-lall-aall "Show all Logical disk group information"
Megacli-pdlist-aall "Show All Physical Information"
Megacli-adpbbucmd-getbbustatus-aall |grep ' Charger status ' "View charging status"
Megacli-adpbbucmd-getbbustatus-aall "Show Bbu status information"
Megacli-adpbbucmd-getbbucapacityinfo-aall "Show Bbu Capacity Information"
Megacli-adpbbucmd-getbbudesigninfo-aall "Show Bbu Design Parameters"
Megacli-adpbbucmd-getbbuproperties-aall "Show current BBU Properties"
Megacli-cfgdsply-aall "Show RAID card model, RAID settings, disk related information"

Changes in the status of the tape, from the drawing to the disk.
Device | normal| damage| rebuild| Normal
Virtual Drive | optimal| degraded| degraded| Optimal
Physical Drive | online| Failed–> unconfigured| rebuild| Online

MEGACLI basic information for capturing raid