Photoshop to the characters on the grassland plus the beautiful backlight effect

The material picture is cloudy photograph, the picture is less the sunlight effect. Color palette can be first to add warm colors to the screen, and the sky part of the refreshing point, and then to the picture local rendering high light, to make backlighting effect can be.

Original

Final effect

1, open the material picture, create an optional color adjustment layer, yellow, green, neutral color adjustment, parameter settings such as Figure 1-3, the effect is shown in Figure 4. This step mainly turns the grass color to reddish brown.

< map 1>

< map 2>

< map 3>

< map 4>

2, press CTRL + J to copy the current optional color adjustment layer, the opacity to: 50%, the effect of the following figure.

< map 5>

3, create a hue/saturation adjustment layer, the blue adjustment, parameter settings such as Figure 6, determined to use a black brush outside the sky, the effect of wiping out, as shown in Figure 7. This step turns the color of the sky into light green.

< map 6>

< map 7>

4, create a solid color adjustment layer, the color is set to reddish-brown: #441E11, to determine the mask filled with black, with a white brush to the bottom to deepen the part of the wipe out, the effect of the following figure.

< map 8>

5, create an optional color adjustment layer, the neutral color adjustment, parameter settings such as Figure 9, to determine the mask filled with black, and then use a white brush to the sky and grassland junction painted out, the effect is shown in Figure 10. This step lightens the middle part slightly.

< map 9>

< map 10>

6, create brightness/Contrast adjustment layer, the appropriate increase in brightness and contrast, and then press CTRL + ALT + G to create a clipping mask, the effect is shown in Figure 12.

< map 11>

< map 12>

7, press CTRL + ALT + 2 to pull up the high light selection, and then create a color balance adjustment layer, the high light adjustment, parameters and effects as shown below. This step adds a light cyan to the high light portion.

< map 13>

< map 14>

8, create an optional color adjustment layer, red, yellow, white to adjust, parameter settings such as Figure 15-17, the effect is shown in Figure 18. This step of the picture in the warm color darker, the high light part of the increase in light cyan.

< map 15>

< map 16>

< map 17>

< map 18>

9, create curve adjustment layer, RGB, green, blue channel adjustment, parameter settings such as Figure 19-21, the effect is shown in Figure 22. This step darkens the dark color of the picture slightly.

< map 19>

< map 20>

< map 21>

< map 22>

Classification:

• PS Image Processing