Problems with establishing an enterprise network on a vro

Enterprise Networks are different from home networks. Their complexity is self-evident. When setting up an enterprise, enterprises often encounter some problems. The following describes how to solve these problems when setting up a CEN.

1. the router configuration is completely correct, but some functions cannot be implemented.

1. If the router configuration is correct, the problem should be on the software system of the router. At this time, we can upgrade the software system, because the system software of a vro usually has many versions and each version supports different functions, the biggest possible cause of this situation is that the current software system version does not support some features, leading to the loss of some vro functions. Therefore, you can solve the problem without unexpected software upgrades.

2. This type of problem has a great impact on enterprise users, but it is easily overlooked by enterprise network administrators, because enterprise users who frequently use the network need a lot of functions, if one or two of them are missing, it will bring a lot of unnecessary trouble to enterprise users.

2. When the vro is started, the network runs normally, but the connection is often dropped after the Internet access for a period of time. After the vro is disabled, the connection can be restarted and frequently dropped.

1. The cause of such a fault is complicated. It may be due to hardware problems, or it may be because someone in the LAN often uses the btsoftware to download data, seriously affecting the network speed, resulting in low network performance, but most cases are caused by improper configuration.

2. BT downloads are slowed down, leading to disconnection. In a shared network, BT downloading is a major problem affecting the network speed. Therefore, in case of frequent online disconnection, you should first check whether there are frequent users in the LAN Using the btsoftware to download data.

3. IP address confusion caused by Multiple DHCP servers. When there are multiple DHCP servers on the network, the IP addresses on the network may conflict, resulting in frequent and irregular disconnection and disabling all DHCP servers on the network, manually specify the IP address.

4. The corresponding connection mode settings are incorrect. On the router management interface, select the WAN port settings option in "Network Parameters" in the left-side menu. Select the "On-Demand connection" option in "corresponding connection mode" and set "automatic disconnection wait time" to "0 minutes", the router will not be automatically disconnected.

5. Trojan attacks. This is another important reason for frequent network disconnection in addition to incorrect settings. If you suspect that the network is under attack by a hacker Trojan, first, check whether all connected computers are infected with viruses or Trojans. Use genuine anti-virus software or Trojan killing tools to scan and clear viruses or Trojans in the computer and then access the internet.

3. You cannot browse the webpage. The webpage cannot be opened normally, but QQ and other programs can run normally.

This is a DNS resolution problem on the vro. If you set the gateway to a DNS address, which is DNSProxy and is not a real DNS address, it may cause an address resolution error, manually set the DNS server address on the router and computer Nic. On the router settings page, find the "WAN port parameter" field in "Network Parameters", and then manually set the DNS server address below. In addition, in the "DHCP service" setting item, you also need to manually set the DNS server address and the backup DNS server address, which needs to be obtained from the ISP supplier.

4. If you want to configure shared Internet access for Enterprise broadband routers, you cannot enter the management interface or log on to the vro Management page.

1. This is mainly because the connection created during the previous login is incorrect. If you have logged on to the router management interface before, you should first check the hardware connection between the Broadband Router and the computer, check whether the indicators on the LAN port of the router are normal. If a firewall or real-time monitoring anti-virus software is installed on the computer, temporarily disable the indicator and set the IP address of the local machine to the same network segment as the Broadband Router, then, set the gateway address to the default IP address of the router.

2. Generally, broadband routers provide Web management. Therefore, open the "Internet Options" dialog box and select "connection, if you have created a connection, select the "Never dial-up connections" option and click the "LAN Settings" button to deselect all selected options.

Finally, the vro Hardware includes storage, power supply, transmission media, CSU/DSU, supplier media, CPU, interfaces, modules, etc, if the purchased vro is of reliable quality, the probability of hardware problems is relatively low. However, there are often hardware faults that can only be sent for repair.