Rac_udev does not recognize a disk when installing a grid by creating a disk

Original Works are from the blog of "Deep Blue blog". You are welcome to reprint them. Please note the following source when reprinting them. Otherwise, you will be held legally liable for copyright.

Deep Blue blog: http://blog.csdn.net/huangyanlong/article/details/40779219

Environment: centos6.4 use udev to configure Disks

The disk group cannot be identified during grid installation, as shown in:

Check the grid version and find that it is a version problem: the installed centos operating system is 64-bit, and the actual grid is 32-bit.

After changing the grid version, click "Change discovery path" next to this step and enter the location of the disk group. The disk files are automatically scanned, as shown in:

Summary:

When you use udev to configure a disk, if the disk group cannot be identified during grid installation, the following are common problems:

1. Check the permission of the device for grid permission issues;

2. Check whether the Grid group is correct;

3. Check whether the grid version conforms to the operating system platform.

Original Works are from the blog of "Deep Blue blog". You are welcome to reprint them. Please note the following source when reprinting them. Otherwise, you will be held legally liable for copyright.

Deep Blue blog: http://blog.csdn.net/huangyanlong/article/details/40779219

Rac_udev does not recognize a disk when installing a grid by creating a disk