Router (Flying Fish star)

Pre-Preparation:

1. Network cable X2

2. Router X1

3. Laptop or Desktop X1

Operation Steps:

1. The router has 5 ports, and 2 network cables are inserted into the lan1,wan1, inserting one end of the WAN1 to connect the cable port, inserting the end of the LAN1 to the computer.

2. Login router on the back of the IP address: 192.168.0.1, account password (according to their own router information)

3. Go to the Settings page ==> basic configuration ==> Quick Setup, account password (network company given, do not do their own blind), the following have unlimited password settings

The above three steps can complete the WiFi settings, save the settings can restart the route

4. Set WiFi name, SSID (from a self-remembering name easily)

5.MAC address filtering, click "Enable" (otherwise your computer seems to link not on the WiFi)

6.PSK password settings (wifi password like I set), set this is not want to let WiFi cracked software hack (you know!)

7. The router has a small hole, that is the restart button (with a pen to press 10S), and then go to the login page reset

Good night!

Can ask me if you have question!

                                 &NB Sp                          ,         &NB Sp                          ,         &NB Sp                          ,         &NB Sp                          ,         &NB Sp                          ,         &NB Sp                          ,         &NB Sp                                                            ,         &N Bsp                          ,         &NB Sp                          ,         &NB Sp                          ,         &NB Sp                          ,         &NB Sp                          ,         &NB Sp                          ,         &NB Sp                                                            ,         &NB Sp                

Router (Flying Fish star)